Madness will be a TOGO looping wild mouse with
- Vertical Loop
- (possible) Corkscrew
- Automated Station with station gates
- Micro Chain lift hill with catwalks
- Altered Coaster Car
- Hairpin Turns
- Hairpin Drops,
- Convenient lift hill assembly (The motor will be placed at a convenient location and a series of axles, chain and gears will transfer power to the chain drive).
- Addition things (no ideas just yet).
Below are photographs of my current progress.
GOPR0223.JPG 152.98KB 1 downloads
Pic 001 shows the top of chain lift assembly. The chain that is going vertical is being used to transfer power from the motor which is located elsewhere (for convenience). I have used Micro Chain as I personally think it looks better than the traditional SS Chain.
GOPR0224.JPG 131.05KB 0 downloads
(I am sorry for the quality of this image). This shows hairpin drop (on right) followed by straight track (will be a brake), hairpin turn left, straight track (station), down curve left (towards lift) and bottom of the lift.
GOPR0225.JPG 103.99KB 0 downloads
Shows one of the hairpin turns (yet to be completed), train enters track (from top) and exits (below).
GOPR0226.JPG 122.14KB 0 downloads
Another shot of where the station will be. Also shows bottom of lift better.
GOPR0227.JPG 126.87KB 0 downloads
Bottom of the lift.
GOPR0228.JPG 104.69KB 0 downloads
Another shot of the top of the lift.
GOPR0229.JPG 108.95KB 0 downloads
Lift axle assembly. Motor is at edge of ride (more convenient location).
Progress will be updated as and when I can.
Attached Files
Edited by SamTheCoasterMan, 20 September 2016 - 09:28 AM.