Attached Files
-
IMG_0411.JPG 82.81KB
2 downloads
Getting SS coaster cars to work with RR boosters
Started by
Max901
, Jul 28 2017 01:26 PM
3 replies to this topic
#1
Max901
-
-
- 2 posts
Newbie
Posted 28 July 2017 - 01:26 PM
Hi! This is my first post on sscoasters, and I have a question regarding my newest (and first) project. My cars lose most of their speed after the first inversion, so I want to add a RR booster after the first inversion. But, the Screaming Serpent cars can't fit through the boosters. The only idea I've had to solve this problem is to remove the excess plastic with a dremel. So, is there a better way to get the cars to fit through, or should I use my idea with the dremel? Thanks in advance.
#2
Rollerfreak987
-
-
- 2448 posts
definitely gone crazy
Posted 28 July 2017 - 03:09 PM
The dremel idea would work perfectly. A lot of us have done it in the past. Just be careful not to cut the wheel.
Welcome to SSC!
1- Time Traveler 2- Magnum XL-200 3- The Voyage 4- Velocicoaster 5-Iron Gwazi 6- Phantom's Revenge 7- The Beast 8- The Legend 9- Tiested Timbers 10- Steel Vengeance
Follow me on Instagram @coastergeek987
Credit Count: 305
#3
Max901
-
-
- 2 posts
Newbie
Posted 28 July 2017 - 04:06 PM
Thank you so much! I can't wait to finish my project now!The dremel idea would work perfectly. A lot of us have done it in the past. Just be careful not to cut the wheel.
Welcome to SSC!
#4
YolosweggLord
-
- 138 posts
Construction Foreman
Posted 28 July 2017 - 09:06 PM
Here's an example: https://m.youtube.co...h?v=Z38ehts1LFM
If you look closely at 1:13, you can see a bit of the booster cut off.
If you look closely at 1:13, you can see a bit of the booster cut off.
- Max901 likes this
