As some of you may know, I am modelling several k'nex parts in SolidWorks. I needed to find as many different track-support lengths as possible, so I started my own database of ways to make track-support connections. This thread could be very usefull for new members, that aren't very experienced with these connections.
I will try to update this thread from time to time.
Here's a part of the database, from short to long (I'm aiming for a smooth "ladder", with less than a mm between two different track-support connections):
Track-support connections
Started by
knex-man
, Dec 14 2012 05:48 PM
4 replies to this topic
#1
Posted 14 December 2012 - 05:48 PM
#2
Posted 14 December 2012 - 06:38 PM
Amazing!!!
they are extremely well made. keep going!
they are extremely well made. keep going!
#3
Posted 15 December 2012 - 12:03 AM
Incredible! I use the filth one the most. Please continue with your fine work.
[SIGPIC][/SIGPIC]
#4
Posted 15 December 2012 - 06:47 AM
That was really cool to look at.
#5
Posted 15 December 2012 - 09:50 AM
Fantastic job on these, I've never even seen some of those connections before.
MF | Toro | TTD | Maverick | Ka | Griffon | Nitro | Storm Runner | Skyrush | Phoenix