4 replies to this topic

[CrayCray for coasters]

Firstly, make this  UNADJUSTEDNONRAW_thumb_62.jpg   113.19KB   2 downloads

Make this next

 UNADJUSTEDNONRAW_thumb_63.jpg   129.27KB   1 downloads

 

next this   UNADJUSTEDNONRAW_thumb_64.jpg   158.1KB   0 downloads

 then add some white/ silver rods  UNADJUSTEDNONRAW_thumb_65.jpg   156.94KB   1 downloads

then add the first crossties   UNADJUSTEDNONRAW_thumb_67.jpg   183.43KB   1 downloads 

 

add flexis and more crossties 

 UNADJUSTEDNONRAW_thumb_69.jpg   188.69KB   2 downloads

Add track and you're done, You have your very own heartline roll, just add supports and take out the framing:  and that's it, Result:  UNADJUSTEDNONRAW_thumb_6b.jpg   133.7KB   1 downloads

 

 

Edited by CrayCray for coasters, 13 April 2020 - 12:01 PM.

[thegamingninja]

the picture dont work for me. dam i wanted to see lol

[CrayCray for coasters]

the picture dont work for me. dam i wanted to see lol

 got it back up and running, ryan. As long as you're logged in, it should function just fine.

Edited by CrayCray for coasters, 13 April 2020 - 12:58 PM.

[thegamingninja]

yh ive got it set to allays be logged in, its working now. 

dose making the cross ties do a 1/4 roll eatch section work for you? because when i tried doing the roll that tight the bottom of my trains rub on the track and stop the trains from moving freely through the rolls 

[CrayCray for coasters]

yh ive got it set to allays be logged in, its working now. 

dose making the cross ties do a 1/4 roll eatch section work for you? because when i tried doing the roll that tight the bottom of my trains rub on the track and stop the trains from moving freely through the rolls 

yeah but you have to quad tube and have to make sure the crossties are turned 45 degrees in the way your going to be banking

Edited by CrayCray for coasters, 13 April 2020 - 02:05 PM.