Question rct3: Switch track and supports
#1
Posted 03 July 2005 - 10:56 AM
1 How can you make switch track and does it works?
2 How can you make other supports for your coaster. I mean, if you make an KK with rct3, you get other supports than the real supports of KK. Chek this picture of the KK from NR33 and look at the supports:
How can you make that supports?
QAFS
#2
Posted 03 July 2005 - 11:19 AM
C: folder
Application date
options
then type in
Allowsametrackintersect1
Then you can build a coaster throgh the current track to make it look like a switch track cominng off of the real coasters track.
#3
Posted 03 July 2005 - 01:51 PM
I have 2 questions:
2 How can you make other supports for your coaster. I mean, if you make an KK with rct3, you get other supports than the real supports of KK. Chek this picture of the KK from NR33 and look at the supports:
How can you make that supports?
QAFS
Ok, thnx Metalhead!! But now the second question... Who know how to do that?
#4
Posted 03 July 2005 - 02:02 PM
#5
Posted 03 July 2005 - 03:41 PM
You can fake a real looking switch track by going to
C: folder
Application date
options
then type in
Allowsametrackintersect1
Then you can build a coaster throgh the current track to make it look like a switch track cominng off of the real coasters track.
What the hell? Which folder?
-matt-
#6
Posted 03 July 2005 - 05:36 PM
application data
then atari
then RCT3
Thne optins and type in Allowsametrackintersect1
#7
Posted 04 July 2005 - 10:13 AM
EDIT: 64000th post of this forum!!!!!
#8
Posted 04 July 2005 - 09:46 PM
You go to your folder
application data
then atari
then RCT3
Thne optins and type in Allowsametrackintersect1
Where did you get this info..what else can you put in there...
-matt-
#9
Posted 05 July 2005 - 06:35 PM
#10
Posted 05 July 2005 - 06:44 PM
What the hell?
-matt-
#11
Posted 05 July 2005 - 08:23 PM
Try that. The options.txt is in documents and settings> application data (it's a hidden folder, go to folder options under tools and hit toe view tab and enable veiwing of hidden folders and files)>atarti>rct3>options.txt. You may wish to open it with wordpad, then press enter on the last line and paste in what you want followed by a 1 to turn it on or a 0 to turn it off (should be spaced after the line). Just observe the current lines on there and note exactly how it's done, spaced, etc. Here's my options.txt just as a sample.
Resolution 1024 768
MaxSounds 100
MaxMusic 4
BackgroundMusic ""
GuestLOD 1.29 1.86
AnimalLOD 0.3 1.89
VegetationLOD 1.68 3
FenceLOD 2.4 3
BuildingLOD 1.92 3
PathLOD 1.89 3
SceneryLOD 1.92 3
SupportLOD 2.1 3
TrackLOD 3 3
RideLOD 2.16 3
SkipBannerSequence 1
ReflectEnable 0
ReflectBackground 1
ReflectTerrain 0
ReflectScenery 0
ReflectPeople 0
ReflectParticles 0
CameraUserControlMode 1
BlendSceneryLODs 0
Shadows 0
TakeAllPhotos 0
TakeCoasterPhotos 0
TakeVistaPointPhotos 0
SceneryVisibilityAlpha 0.57
GeometryImposterDistance 1500
GeometryImposterTolerance 0.35
Keys TakeScreenMovie F11
GuestsHaveFixedHealth 1
GuestsRevisitRides 1
GuestsRideUnratedRides 1
RidesDontBreakDown 1
ImportMyMusic 1
Swaying3DTrees 0
AutoScrollAtEdge 0
DetailMapTerrain 0
StaticBatchTriCutoff 50
DynamicBatchTriCutoff 50
AttractionSceneryAllowTerrainIntersect 1
AttractionSceneryAllowSceneryIntersect 1
TrackAllowSameTrackIntersect 1
SkipCacheWarming 4.000000
AdvancedPhysics 1
MultiSample 0
Brightness 0.500000
Beware that if you use this, it will overrite your regular settings (keyboard shortcuts, graphic settings, etc) and may not work with soaked.
#12
Posted 05 July 2005 - 08:50 PM
-matt-
#13 Guest_Twister II_*
Posted 06 July 2005 - 12:14 AM
#14
Posted 06 July 2005 - 09:29 AM
-matt-
#15
Posted 14 July 2005 - 08:28 PM
Not working for me..after Application Data it only shows Microsoft..do I have to Re-Install RCT3?
First, you may wish to install the patches (not sure if that works), otherwise, you may have to reinstall. And check to be sure that it isn't hidden either (I know, there's almost no chances of that, but just in case, when you've tried everything else)
Or maybe you simply looked into the wrong user's folder... Also, the directions are for winXP. I'm not sure where it is for older versions of windows.
#16
Posted 14 July 2005 - 08:33 PM