G2
#1
Posted 15 November 2003 - 08:10 PM
include one loop and a barrol-roll. Will be good.
Gforces Worlds of Adventure
#2
Posted 16 November 2003 - 11:44 AM
inverts! I build one, than coasterfreak says he is going to build one, now you.
Good luck!
2003 - Thunder Twist | Iron Falcon | Insanity | Voltage | Banshee
2004 - Centaur | Polar Plunge | Chaos | Nessie | Eclipse | Desert Eagle
2005 - K2 | Jaguar
#3
Posted 17 November 2003 - 06:23 AM
never built one so here I am! This topic can be moved to the construction forums
if a mod could do that. thanks.
Gforces Worlds of Adventure
#4
Posted 19 November 2003 - 06:33 PM
coming along pretty well!!
#5
Posted 27 November 2003 - 02:42 PM
it more complicated the lift goes through the loop at an angle.
total
hours of work=3.5
Gforces Worlds of Adventure
#6
Posted 27 November 2003 - 03:50 PM
2003 - Thunder Twist | Iron Falcon | Insanity | Voltage | Banshee
2004 - Centaur | Polar Plunge | Chaos | Nessie | Eclipse | Desert Eagle
2005 - K2 | Jaguar
#7
Posted 27 November 2003 - 03:58 PM
the loop into a corkscrew or 0 g roll that goes over the lift and then make the loop go
somewhere else. The train won't have a complete custom but it'll have a
small bar connected to a 45 degree connector to another 45d.c. and then to the peep.
You prbably didn't get that but I'll start on the train later today and post a
picture.
4 hours of work done so far.
Edit=looking on
other threads I found a good pic of what i was trying to describe and it ended up like
yours Sorry
I'm not trying to copy you
Gforces Worlds of Adventure
#8
Posted 06 December 2003 - 08:33 PM
luck!I haven't been able to finish one since. I use to take pride in finishing
my coasters. Anyways I will be making G3 which will be a compact twister. Its name
will be Transit Twister.
tran·sit ( P ) Pronunciation Key (trnst, -zt)
n.
1.The act of passing over, across, or through; passage.
Hopefully this coaster will have a lot of fly-bys, near misses, compact, and very
twisty.
Stay tuned!
Gforces Worlds of Adventure
#9
Posted 07 December 2003 - 12:09 AM
loop over the lift. I've had a similar idea in my head for a while too, but my work
on "My First Custom" has kept me from experimenting. And from what
I've done so far, with the three very close calls, I'd like to see what your
twister turns out to be. Once I started with the first cross over, I had and still have an
obsession with "headchoppers" and close calls. If there were little top hats
for the riders on the trains, they wouldn't return to the station with them on.
Can't wait to check out G3, and maybe we'll see an invert from you soon
too.