hello,
i made an tutorail about a inverted tube coaster.
here they are
http://www.sscoaster...=1&d=1245775386
http://www.sscoaster...=1&d=1245775386
http://www.sscoaster...=1&d=1245775386
http://www.sscoaster...=1&d=1245775386
http://www.sscoaster...=1&d=1245775386
tube support inverted coaster
Started by
pimiboj
, Jun 23 2009 11:48 AM
coaster inverted knex supports tube
6 replies to this topic
#1
Posted 23 June 2009 - 11:48 AM
#2
Posted 23 June 2009 - 01:24 PM
How is this a tut? Is for track a lift or what? It looks like just a peice of inverted lift hill.
#4
Posted 23 June 2009 - 07:30 PM
wth? I don't know what this is. And I agree...we can probably figure tubes out ourselves, especially since most everyone on this site has tons of experience; and it would be better to make a tutorial on something more general; and why is there a big box support on top?
#5
Posted 24 June 2009 - 12:10 PM
i know, but what i want to show is the part where you connect the tubes to the track. and i had difficulties with this piece and when i figured it out, i thought some people want to know this also. and the last foto,mayby you can see it is part of an 45 degrees angle like an lift hill and the orthers are for just for straight pieces of track.
but i know it isn't clear but is just my second tutorial.
sorry that this was so unclear.
but i know it isn't clear but is just my second tutorial.
sorry that this was so unclear.
#6
Posted 24 June 2009 - 12:15 PM
and i know this is not an tutorial but when i made this i saw that i had to go to school, so i just saved it when it was not done. i'll make an new one in a few days.
#7
Posted 24 June 2009 - 05:04 PM
Yeah, Um... Get the supports to be able to make a lift...
The way you've connected it, you can't make a lift...
The way you've connected it, you can't make a lift...
[SIGPIC][/SIGPIC]