Part 1 is the Intamin set...
In the pack, there's a loop, cobra roll, corkscrew, slightly-descending heartline rolls (1-4), the weird Intamin curving drops (works for loopers and inverts), tophats (small to large), hills (shallow to steep), two buckels, overbanked turns (135-270 degrees), a flying snake dive, an inverted cobra roll and an inverted heartline roll.
Note that you may need to adjust elements (ctrl+G helps sometimes), and the flying snake dive does not have a pullout so you can make it any height. Be careful with the snake dive and heartline rolls, because if you reduce the scale of them, the heartline is lost.
To insert an element, press Ctrl+E or go to File->Insert Element and pick whatever element you want to insert.
So, without further adieu...
INTAMIN ELEMENTS - DOWNLOAD LINK
Here's an example of a coaster I made in just a few minutes using the Intamin Elements. However, I adjusted the hills from two hill elements and all of the turns and the ending were made without any elements (which was what took up most of the time to make it.)
(Oh yeah, note the wraparound corkscrew I threw in there. Kanonen kind of has one, but that's a secret...
)
And that was just a few minutes of work. Hopefully this speeds up the Intamin requests.
Next are the B&M elements, then probably Vekoma/Arrow (although, I might not make them since it'd only be loops and corkscrews.) Maybe a miscellaneous pack would work, like random but cool elements.
