5 replies to this topic

[Outerlimits659]

My hypercoaster has been broken into chunks and is now laying all over the garage. Today I did a lot of work on my next coaster-a launched. I'll be mixing some different coaster styles so this will not be a specific company design. So far I have about 3/4 of my tophat done. The first half of the tophat is based slightly off of Superman: Escape, but is still a bit different. Just thought I'd post this here to show you guys before the rest of SSC.



As you can see, the pullout will turn while descending. The name and theming ideas will be posted on the official thread. Feel free to comment...

-OL659-

[LCAL]

If you want it to be like Superman Escape, you should make it steeper, or taller. Also, do you have enough xties of one color? It looks messy when you use different ones with no pattern.

[Outerlimits659]

There actually is a pattern. Just look closely, the pattern goes green yellow, green yellow. And TBH I didn't really like what I had in the first place. So there's been a slight change of plans....



It's meant to be a bit of a combo between S&S and my own style. Please comment, official thread will be up tommorrow (hopefully).

-OL659-

[LCAL]

Awesome. Good luck with a launch. I havent even tried one with Virus.

[KCB Designs]

You have a sharp spot near the end of the pull-in to the top hat.

[Outerlimits659]

I think I fixed it, but check in the official thread to make sure.

-OL659-