Here is what we will be building:
Here are the pieces you will need:
Now take the two connectors and add the red rod like so:
Now add four spacers and the two white connectors:
Then add three more spacers and close the rod like so:
Then make this on both sides using four blue rods and another white connector:
Now use the red connectors to make the seats and place the gray one in the middle(do this for both sides):
Now take two gray connectors and add the small black rods to the bottom. Then attatch them to the back seats like so:
Once you do that add the rubber band to keep the chaindog from slipping. The final product should look like this:
Hope This Helped!
