139 replies to this topic

[scott]

Hey everyone i still only have 1 ss set, and have been tryin to get another but i figured id make a really tiny coaster so why not here it is!

ALSO name ideas are welcome!

[LaMbChOpZ]

wow, looks really small and good. By the looks of it, it could be entered into the winter contest.

[TheSUCKCrew]

Wow, that thing is barely 1 and a half green high.
It looks good, but really, go bigger man!

[Aaron]

It looks good, but I think you should make it about 1 red rod taller to be able to make a good inversion.

Is that the ATV off of knex innovation?

[scott]

It looks good, but I think you should make it about 1 red rod taller to be able to make a good inversion.

Is that the ATV off of knex innovation?

am makeing it taller by a red since so many want it to be bigger, and yes that is the atv from KI

Wow, that thing is barely 1 and a half green high.
It looks good, but really, go bigger man!

Haha, yes it small but will be taller i hope i just dont run out of tubing!

wow, looks really small and good. By the looks of it, it could be entered into the winter contest.

It prolly could be... When is the last day i can enter it on?

[Aaron]

I accidentally clicked to make box supports, keep it tubes. When are you getting a new ss?

[LaMbChOpZ]

scott, check the thread for it, but i think its not until March, which is why i actually might enter it, but im having problems with my coaster. I actually say to make it a bit taller, maybe another red tall, but dont forget, if you do enter it, its being judged/ruled out to 100yellow boxes as the area of layout, including station.

[scott]

scott, check the thread for it, but i think its not until March, which is why i actually might enter it, but im having problems with my coaster. I actually say to make it a bit taller, maybe another red tall, but dont forget, if you do enter it, its being judged/ruled out to 100yellow boxes as the area of layout, including station.

Made taller.

I accidentally clicked to make box supports, keep it tubes. When are you getting a new ss?

Well I have almost got one but im not so sure I hope soon.

****************************************************
***UPDATE***
Well I made it taller because almost everone asked for it. and is this drop ok for the contest???



BE HARSH!!!!!!!! because im entering into a contest.

[IonZer0]

It seems to immediately go into a steep dive, and the pullout begins way after the place it should. You must be paying close attention to the crosstie rule! LOL

[RCExtreme]

Yeah, dragonz45 is right. Also, that support in the middle of the drop needs to be a tube, it looks really weak right now.

[IonZer0]

Finally! somebody doesn't call me "^" THANK YOU RCExtreme!!!! And I was about to post about that, but thought, hmm, how many cars and peices does he have? If you can, make it a tube. If not try to add a bit more support than that.

[kid26120]

haha its so hard when we have only one box ^^ I remember
I don't know how you're going to do that ... how meters long the track will be?

[Old_Hag]

There's a sharp spot at the gears and the pullout starts too late.

[Aaron]

Well, the pullout at the moment starts just below the gears, so I think the problem is that the pullout is just too big for the size of the ride. I think you should fix the sharp spot, then start the pullout about half way down and make the pullout smaller.

[scott]

Well, the pullout at the moment starts just below the gears, so I think the problem is that the pullout is just too big for the size of the ride. I think you should fix the sharp spot, then start the pullout about half way down and make the pullout smaller.

Its a bit small but i'm not sure if its better...

There's a sharp spot at the gears and the pullout starts too late.

Look bellow is it any better?

haha its so hard when we have only one box ^^ I remember
I don't know how you're going to do that ... how meters long the track will be?

I'm not sure how long the track will be, But its gonna be decent sized if I get another ss if not it wont have to much.

Yeah, dragonz45 is right. Also, that support in the middle of the drop needs to be a tube, it looks really weak right now.

Fixed.

It seems to immediately go into a steep dive, and the pullout begins way after the place it should. You must be paying close attention to the crosstie rule! LOL

Well i havent been paying much atten to that X-tie rule because its the way I work i make the track and if it needs more to make it stronger I add more.

************UPDATE************
Well I added some more to it and, I think I have a EXCELLENT tube support!






STILL BE HARSH!!!!!!!!!!!!!!!!!!!!!!!!!! any name ideas?

[the_burrito_master]

Make that pullout and in bigger,allong with the overbank.
You may think you're out of space but your base is only 14x4 you can make it 20x5 and have plenty of room.

[Blackkitty]

Do what burrito said, but also some of you tube to track connections are weak. espically on the drop and pullout.

[Aaron]

Heres a layout idea:

What do you all think?

[LaMbChOpZ]

its kinda hard to tell which is which. you should number them as well.

[Aaron]

Numbered: