I have designed a new type of radii with approx 20* banked.
What do you think?
5 replies to this topic
#1
Posted 27 January 2011 - 12:28 AM
#2
Posted 27 January 2011 - 03:56 AM
I personally think there are easier ways to bank the track than to use the radii method.
*Insert signature here*
#3
Posted 27 January 2011 - 04:15 AM
I believe this has been used before. Max used a similar technique to bank his track on Big Apple.
Advantage of what you have is that you have a fixed banking. Disadvantages are, in my opinion, limited options for banking and a warped structure.
Advantage of what you have is that you have a fixed banking. Disadvantages are, in my opinion, limited options for banking and a warped structure.
SSCoasters Administrator
The SSCoasters Forum Rules
#4
Posted 27 January 2011 - 04:25 AM
^ and also limited radii turns, this couldn't cope up with a tight turn.
But it looks good, maybe this can be used for woodies.
-HamencChiz-
But it looks good, maybe this can be used for woodies.
-HamencChiz-
#5
Posted 27 January 2011 - 11:05 AM
Well, when I thought of this, it was intended to be used on woodies for low speed turnarounds. It makes a bank thats not 45* and doesn't require a more complex holding system like on Alpal's Wolverine Wildcat.
You can probably make it just as tight as other radii turns by changing the interior horizontal rod.
You can probably make it just as tight as other radii turns by changing the interior horizontal rod.
#6
Posted 27 January 2011 - 04:48 PM
if my memory is decent, i believe this technique is also used in the original knex coaster set.
Future member of the UNCC Drumline
[SIGPIC][/SIGPIC]
Intimidator 305
Milf - Maverick - TTD - Dimondback - Griffon - Intimidator - Alpengist - Dominator - Thunderhead