#1
Posted 03 February 2011 - 01:40 PM
Here is is:
First, start with the track before the roll:
Then make five of these (Tan rods work the best because they are more stiff):
Connect them like so:
Then make 4 of these:
Then connect them to the previous piece so that the angle of the track connectors changes 90 degrees every tan rod.
Next, connect the track like so:
Then put the track connectors on the outside of the roll like so:
Next, depending on the style of building or angle of roll, build the supports around it and then AFTER YOU PUT THE SUPPORTS ON AND MAKE THEM SECURE, take the guide off.
Automation is my specialty
If only I had more space/pieces/time.
#2
Posted 03 February 2011 - 02:08 PM
#3
Posted 03 February 2011 - 03:47 PM
SSCoasters Administrator
Read The Forum Rules(smart)
#4
Posted 04 February 2011 - 06:54 AM
Edited by Jogumpie, 04 September 2013 - 12:54 PM.
SSCoasters Administrator
The SSCoasters Forum Rules
#5
Posted 21 February 2011 - 08:34 PM
#6
Posted 21 February 2011 - 09:10 PM
#7
Posted 21 February 2011 - 10:18 PM
ReadThisBackwards
Me is CLK 10...So I Be Building Dem Tube Supports
[SIGPIC][/SIGPIC]
New Coaster! Yay! http://www.sscoaster...-coaster-16747/