Ok I have good flying coaster cars that I recently made. They are very simple too.
You will be making this:
Parts Count: 37
-6 green connectors
-4 gray connectors
-1 blue end connector
-6 black connectors
-1 tan/brown lock connector
-1 granite rod
-1 blue rod
-4 white rods
-8 green/black rods
-4 blue spacers
-1 small/medium size rubberband
Construction:
Make 4 of these:
Then make this:
Connect them together like so:
Next slide the blue rod through the 4 green connectors like so:
Then connect 2 of the gray connectors and the lock connector to the blue rod like so [HINT: You may need to slide them apart to do so.]:
Now slide the rubber band through the opening in the middle like so:
Place the contraption on the your car with the black prongs through the front 2 holes in your car like so:
Hook the rubber band onto the joint on the rear of your car and the other side either on the chaindog (Front Car) or the same joint like so:
Slide two blue spacers on each side of the protruding granite like so:
Make two of these:
Connect one onto each side like so:
YOUR FINISHED
In Action:
Enjoy!
-AsM
Flying Coaster Cars
Started by
2015ASM
, Jun 22 2011 07:43 PM
1 reply to this topic