1 reply to this topic

[2015ASM]

Ok I have good flying coaster cars that I recently made. They are very simple too.

You will be making this:


Parts Count: 37
-6 green connectors


-4 gray connectors


-1 blue end connector


-6 black connectors


-1 tan/brown lock connector


-1 granite rod


-1 blue rod


-4 white rods


-8 green/black rods


-4 blue spacers


-1 small/medium size rubberband


Construction:

Make 4 of these:


Then make this:


Connect them together like so:


Next slide the blue rod through the 4 green connectors like so:


Then connect 2 of the gray connectors and the lock connector to the blue rod like so [HINT: You may need to slide them apart to do so.]:


Now slide the rubber band through the opening in the middle like so:


Place the contraption on the your car with the black prongs through the front 2 holes in your car like so:


Hook the rubber band onto the joint on the rear of your car and the other side either on the chaindog (Front Car) or the same joint like so:



Slide two blue spacers on each side of the protruding granite like so:


Make two of these:


Connect one onto each side like so:


YOUR FINISHED



In Action:




Enjoy!

-AsM

[DrCoasters]

nice one!