#1
Posted 25 July 2011 - 12:31 PM
pieces that you need:
first add the red rods
after press the rods almost this:
put the green connectors
and let no space betwen the connector and the cars:
now you have to choise individual or multiple:
individual:
multiple
to the rod do not fall take some glue put in a glass put the rods twist then in the glue take it and put in the connector after you clean the car and it´s done!
#2
Posted 25 July 2011 - 04:03 PM
[SIGPIC][/SIGPIC]
#3
Posted 25 July 2011 - 05:31 PM
.
#4
Posted 25 July 2011 - 09:18 PM
nice, I like it.
thanks!
Very simplistic, but nice. I bet you can expand even more on these
i will try to think on something.
#5
Posted 26 July 2011 - 04:46 AM
#6
Posted 26 July 2011 - 09:48 AM
#7
Posted 26 July 2011 - 09:54 AM
thanksNice and simple, but clever, good design!
I like it, but your instructions are confusing, especially towards the end.
sorry the end just say to put the rods in a glass of glue ad re-put than in the car.
#8
Posted 28 July 2011 - 05:21 PM
Also, when I get back to California, I will post a tut. so you cannot see the chain tho make the lift cooler!
#9
Posted 28 July 2011 - 06:37 PM
That is very cool man!!!!!!! I am about 15 miles away from CEDAR POINT!!!!
Also, when I get back to California, I will post a tut. so you cannot see the chain tho make the lift cooler!
cool man i want to see this!