how do i get a ss car to connect to the second lift on boomerang?!!?!?!?!?!
7 replies to this topic
#1
Posted 12 September 2011 - 06:26 PM
#2
Posted 12 September 2011 - 06:32 PM
Add a second chain dog to the back of the train.
.
#3
Posted 13 September 2011 - 05:47 PM
how do i make it so the chaindog connects to the lift, then when it gets to the top, it releases and lef[ts the train drop?
#4
Posted 13 September 2011 - 09:15 PM
I know how. Heres how you do it:
You get creative. You go through trial and error until you get one that works. Just experiment.
You get creative. You go through trial and error until you get one that works. Just experiment.
#5
Posted 17 September 2011 - 07:53 AM
It would require good timing, but could you clip a connector to the chain (which as it goes in, leaves the car to roll down)
#6
Posted 17 September 2011 - 11:05 AM
i have tried that ^ and it didn't work. i want to make a mock chain dog but i can't think of how to make it work
#7
Posted 19 September 2011 - 08:58 PM
Well it would have to have a perfect timing with the chain so the chaindog would connect at the right moment. Then you would probably have to build an automatic lift and a section where the chain would release the train.You need to experiment with trial and error. Monbe you could send in a couple of pics so we can see what's going on.
~Wookie
_____________________________
_____________________________
~I AM A BUILDER~
#8
Posted 19 September 2011 - 09:17 PM
If you post some pictures we will be able to help you better.
Also tagged with one or more of these keywords: boomerang knex ss help
Theme Parks, Coasters, Games, & More →
Talk About Anything →
Digital Composing Anyone?Started by LaMbChOpZ , 28 Jun 2012 boomerang knex ss help |
|
|
||
→
Special Topics →
What or who inspired you the most to build?Started by Maxlaam , 02 Mar 2012 boomerang knex ss help |
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Building Help →
Cable Lift Help?Started by Intimidator305 , 25 Aug 2011 boomerang knex ss help |
|
|