^which turn? the pre teaser hill or the twist n turn?
Outlaw Run Recreation Lets Try This Again! 7/31/2014 (update and test runs)
Started by
CartRacer56
, May 13 2014 10:13 AM
heaven loss mourn pass thread
127 replies to this topic
#42
Jumpge
-
-
- 3930 posts
Stopping by every now and then!
Posted 22 May 2014 - 02:23 PM
Your emphasis on all the features of the ride in the beginning of the video is great! 
#43
JayketheKid
-
- 953 posts
A.K.A J-Coasters
Posted 22 May 2014 - 03:22 PM
The twist and turn
(1)- Voyage (2)- X2 (3)- Steel Vengeance (4)- Twisted Colossus (5)- Storm Chaser [6]- Fury 325 (7)- Outlaw Run (8)- Maverick (9)- Magnum XL-200 (10)- Monster
Coaster Count: 174
Park Count: 25
#44
CartRacer56
-
-
- 1031 posts
Inversion Enthusiast
Posted 22 May 2014 - 03:40 PM
its not finished yet it will start at ground lvl dont worry i know what im doing
#45
CartRacer56
-
-
- 1031 posts
Inversion Enthusiast
Posted 25 May 2014 - 03:25 PM
hey guys i got a Go-Pro Hero 3 for the Christmas last year and finally put it on my coaster car to get a on ride pov so here it is!
pictures coming soon!
EDIT: PICTURES!
the over view
more blurry pictures
the new teaser hill
idk y i took diz picture
the drop
thats all! comment!
pictures coming soon!
EDIT: PICTURES!
the over view
more blurry pictures
the new teaser hill
idk y i took diz picture
the drop
thats all! comment!
Edited by Cartracer55D, 25 May 2014 - 03:49 PM.
#46
Witting
-
- 1077 posts
Lead Engineer
Posted 25 May 2014 - 03:37 PM
That's some high quality footage. The ride could be a bit longer though 
.
.
#48
JayketheKid
-
- 953 posts
A.K.A J-Coasters
Posted 25 May 2014 - 05:07 PM
The little pop before the drop(very top and a little bit before) is straight in real life. on this it is turning. I would try and straighten it.
Edited by JayketheKid, 25 May 2014 - 05:26 PM.
(1)- Voyage (2)- X2 (3)- Steel Vengeance (4)- Twisted Colossus (5)- Storm Chaser [6]- Fury 325 (7)- Outlaw Run (8)- Maverick (9)- Magnum XL-200 (10)- Monster
Coaster Count: 174
Park Count: 25
#49
motomoto123
-
-
- 56 posts
Construction Worker
Posted 26 May 2014 - 01:04 AM
you are doing well keep the good building up
#50
Killerbunny
-
-
- 554 posts
Fear the bunny!
Posted 26 May 2014 - 03:30 PM
The drop definitely needs to be smoothed, the crest of it looks kind of sharp to me. I think the ride would look a lot better as a whole if you spaced out the x-ties more evenly.
Thanks Spitfire!
Coaster Count: 73
1. Millenium Force 2. Montu 3. Top Thrill Dragster 4. Raging Bull 5. Maverick
#51
Yannick
-
- 614 posts
Colossos Forever
Posted 26 May 2014 - 03:49 PM
I think you should'nt use the brown connectors on the flexies. If you use them you can't space x-ties evenly and I think it looks nicer if you just use one colour on the cross-ties.
I hope I could help;)
I hope I could help;)
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#53
Terry Hughes
-
- 147 posts
Knex Coaster Noob
Posted 27 May 2014 - 09:47 PM
I was too distracted by the hanger on the ceiling.
[SIGPIC][/SIGPIC]
Top 5: Gatekeeper | Millennium Force | Magnum XL-200 | Excalibur | High Roller
WIP: Spongebob Squarepants Rock Bottom Plunge - VV recreation
#54
Yannick
-
- 614 posts
Colossos Forever
Posted 28 May 2014 - 04:58 AM
How do you fasten your GoPro on the trains? With rubber bands?
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#55
+Timmeh+
-
- 890 posts
ranting somewhere about something
Posted 28 May 2014 - 06:44 AM
You might want to stop using ladders and start to make the flexy rods in line with each other.
Sic Parvis Magna
#56
JayketheKid
-
- 953 posts
A.K.A J-Coasters
Posted 28 May 2014 - 07:34 AM
Matter of fact you might not want to use flexis at all for most if the ride. The turns and valley of the drop should be gray rods too. It's stronger and will lose speed less. How many cars are you using?
(1)- Voyage (2)- X2 (3)- Steel Vengeance (4)- Twisted Colossus (5)- Storm Chaser [6]- Fury 325 (7)- Outlaw Run (8)- Maverick (9)- Magnum XL-200 (10)- Monster
Coaster Count: 174
Park Count: 25
#57
CartRacer56
-
-
- 1031 posts
Inversion Enthusiast
Posted 28 May 2014 - 09:34 AM
I was too distracted by the hanger on the ceiling.
haha I had a stop motion track on that but it fell
How do you fasten your GoPro on the trains? With rubber bands?
yes I have some pics i could post on the tut forums if you all would like
You might want to stop using ladders and start to make the flexy rods in line with each other.
Matter of fact you might not want to use flexis at all for most if the ride. The turns and valley of the drop should be gray rods too. It's stronger and will lose speed less. How many cars are you using?
i shall do that and without the ladders but it is the splicing that makes me space them out a lot i am getting more very long pieces of tubing so i should be good with that for a while
thanks for all your lovely comments!
#58
CartRacer56
-
-
- 1031 posts
Inversion Enthusiast
Posted 01 June 2014 - 12:30 PM
update!
the new drop
gray rods on te drop!
and no ladder connectors!
COMMENT IF YOU WANT
the new drop
gray rods on te drop!
and no ladder connectors!
COMMENT IF YOU WANT
#59
Connector1o1
-
- 1236 posts
Basic Engineer
Posted 01 June 2014 - 12:34 PM
Looks good! But you might want to start the pullout earlier. Looking forward to more!
Signature not available
#60
Gvus
-
- 1595 posts
Just ride
Posted 01 June 2014 - 12:40 PM
Good job on getting the grey rods in there, but the drop looks pretty bumpy, so you may want to dmooth that out.
