Im happy with the crest and little hop up part before the crest too.
Just wondering what you guys think
The highest point of the ride is 6 granites.
Edited by +Timmeh+, 03 December 2014 - 10:04 PM.
Mini Hyper-coaster Thing [12/3] NEW UPDATE
Started by
+Timmeh+
, Dec 02 2014 10:44 PM
knex micro rollercoaster station vv coaster
6 replies to this topic
#1
+Timmeh+
-
- 890 posts
ranting somewhere about something
Posted 02 December 2014 - 10:44 PM
After my experience with Turmoil Redefined, I want to build smaller to gain more skill, and then i'll go bigger as I progress
Im happy with the crest and little hop up part before the crest too.
Just wondering what you guys think
The highest point of the ride is 6 granites.
Im happy with the crest and little hop up part before the crest too.
Just wondering what you guys think
The highest point of the ride is 6 granites.
Sic Parvis Magna
#2
Gvus
-
- 1595 posts
Just ride
Posted 02 December 2014 - 10:51 PM
I like the look so far, hopefully you can make this really nice with the small size.
#3
-i!Koozie!i-
-
- 368 posts
!Wazzap!
Posted 02 December 2014 - 11:21 PM
The pullout will end up being really sharp if you do not start it sooner. Other than that great coaster!
^Thanks Coasterman345^
1.IRON RATTLER 2.POLTERGIEST 3.SUPERMAN: KRYPTON COASTER 4.TITAN 5.JUDGE ROY SCREAM
#4
pkiknex25
-
-
- 8238 posts
Ello!!!
Posted 03 December 2014 - 03:04 PM
Put two grey rods in that gap on the floor. That'll help keep your structure straight and in-line. And keep going on the pull-out with what you have, I think it'll be fine.
SSCoasters Staff
The SSCoasters Forum Rules
GigaSonic XLC, Déjà Vu, Werewolf, WildSide, Thunderhawk, Kaibutsu, Diamondback, Couloir
SVengeance|Voyage|LightningRod|Goliath(SFGAm)|OutlawRun|Fury325|RF2|Taron|StormChaser|Orion|
Coaster Count: 300
#5
IonZer0
-
-
- 859 posts
Wow, we can make these statuses really long now.
Posted 03 December 2014 - 03:08 PM
I agree with PKI, the pullout looks fine, and more connections between the two structures would be helpful. The only issue I see is that there's no structure for the upper gear. Good job otherwise!
TOP 10
1. I305 2. Fury325 3. Skyrush 4. Manta 5. Thunderhead 6. Stormrunner 7. Wildcat 8. Fahrenheit 9. Intimidator 10. Wild Eagle
I305 Count: 11
#6
+Timmeh+
-
- 890 posts
ranting somewhere about something
Posted 03 December 2014 - 06:23 PM
Thanks! I am hoping for a good layout too.I like the look so far, hopefully you can make this really nice with the small size.
Actually not really. It turned out completely fine. ThanksThe pullout will end up being really sharp if you do not start it sooner. Other than that great coaster!
Thank you so much for that tip. Things look much better and in line. I also put some under the lift.Put two grey rods in that gap on the floor. That'll help keep your structure straight and in-line. And keep going on the pull-out with what you have, I think it'll be fine.
If you notice, you can see a yellow crosstie on the crest that marks where I will most likely where i'll put the gears.I agree with PKI, the pullout looks fine, and more connections between the two structures would be helpful. The only issue I see is that there's no structure for the upper gear. Good job otherwise!
Alright, there is not too much content here but this is what i've done :
> I've finished the pullout.
> Added more TTS, laterals, and other supports to the drop.
> Im working with more natural light mixed with some florescent lighting.
Edited by +Timmeh+, 03 December 2014 - 06:26 PM.
Sic Parvis Magna
#7
-i!Koozie!i-
-
- 368 posts
!Wazzap!
Posted 03 December 2014 - 11:09 PM
Sorry I did not see that the pullout was a little bit elevated. Stupid me.
^Thanks Coasterman345^
1.IRON RATTLER 2.POLTERGIEST 3.SUPERMAN: KRYPTON COASTER 4.TITAN 5.JUDGE ROY SCREAM
