4 replies to this topic

[CrayCray for coasters]

Drop track’s rails have been made
 image.jpg   141.96KB   1 downloads
 image.jpg   141.96KB   1 downloads
 61291782977__A7C71279-7AB7-40F0-AA16-47DFD3F397CB.MOV   1.77MB   12 downloads

[FrIeDeGgS]

How will the cars release after dropping down? You'll need something that stops the cars when the track is at the top position and then something else (or maybe the same mechanism but just releasing, if you have the section at a downwards tilt) to get the cars going at the bottom. The actual dropping looks good though and seems to work fine. Also, what coaster is this gonna be for?

Edited by FrIeDeGgS, 04 June 2020 - 01:27 AM.

[CrayCray for coasters]

How will the cars release after dropping down? You'll need something that stops the cars when the track is at the top position and then something else (or maybe the same mechanism but just releasing, if you have the section at a downwards tilt) to get the cars going at the bottom. The actual dropping looks good though and seems to work fine. Also, what coaster is this gonna be for?

the backing up. is just gonna be powered by the drop, when the track drops, a lever comes up and pushes the car across and there is going to be a stopper at the top, it's for @thegamingninja 's th13teen recreation, i'm designing this for him (and also for my family coaster, (two coasters ahead)

[thegamingninja]

would be interesting to see if you can make this work like the real thing.

[CrayCray for coasters]

I am magnet (Wo)man

Magnetic brakes i have

going to use them to make a predrop,

make a predrop with them i am

Edited by CrayCray for coasters, 06 June 2020 - 07:56 PM.