Hey guys,
In the past I bought a Big Ball
Factory. I somehow lost the instructions for the alternate build, the ferris wheel. Well,
I found some images off of the internet of it and I am trying to build it without the
instructions, all I need help with is the big side of it.
As you can see in the
pictures below, the one side of the ferris wheel looks like a big bowl and not a flat
surface. I have checked the picture on the internet over and over again but I
can't seem to find the problem?
Here is what mine looks like.
http://img67.exs.cx/...picture94pg.jpg<
br />http://img67.exs.cx/...icture106nj.jpg<
br />http://img67.exs.cx/...icture114bu.jpg
Here is what is should look like.
http://www.graysage....se/Knex-005.jpg
http://gallerie.sile...Knex_Ferris.jpg
I know that the reason it pops out is because there is too much compression
and the outer ring is too small, but I copied the pictures exactly, so I don't know
what the problem is.
Please someone I need your help I would really
appreciate it.
Thanks in advance,
Justin
Giant Ferris Wheel Help
Started by
unfoldingmetal
, Jan 07 2005 03:42 PM
5 replies to this topic
#1
Posted 07 January 2005 - 03:42 PM
#2
Posted 07 January 2005 - 03:46 PM
If I remember correctly the outer ring also contains
white rods, besides the green rods.
EDIT: 4 white ones, I've got the
instructions in front of me. Use each white rod at a quarter of the ring.
white rods, besides the green rods.
EDIT: 4 white ones, I've got the
instructions in front of me. Use each white rod at a quarter of the ring.
SSCoasters Administrator
The SSCoasters Forum Rules
#3
Posted 07 January 2005 - 05:01 PM
[quote]Originally posted by Jogumpie@Jan 7 2005, 04:46
PM
[b]If I remember correctly the
outer ring also contains white rods, besides the green rods.
EDIT: 4 white ones,
I've got the instructions in front of me. Use each white rod at a quarter of the
ring.
</div><!--Qu
oteEEnd-->
Thank you so much it is fixed!
PM
[b]If I remember correctly the
outer ring also contains white rods, besides the green rods.
EDIT: 4 white ones,
I've got the instructions in front of me. Use each white rod at a quarter of the
ring.
</div><!--Qu
oteEEnd-->
Thank you so much it is fixed!
#4
Posted 07 January 2005 - 05:25 PM
My pleasure
BTW, this ferris
wheel isn't very giant you know. I've built <a
href='http://www.sscoaster...s.php?album=108' target='_blank'>a
bit bigger one</a>.
BTW, this ferris
wheel isn't very giant you know. I've built <a
href='http://www.sscoaster...s.php?album=108' target='_blank'>a
bit bigger one</a>.
SSCoasters Administrator
The SSCoasters Forum Rules
#5
Posted 09 January 2005 - 12:08 PM
OMW HOW TALL ARE YOU DID IT
WORK!!!?!?!?!?!?!?!?!?
33;?! WOWZA
WORK!!!?!?!?!?!?!?!?!?
33;?! WOWZA
#6
Posted 09 January 2005 - 01:12 PM
I'm 1.90m (6 ft 4) and the ferris wheel also is
And I took detailed
pictures of the mechanism: a chain band around the outer ring and a hand crank to
rotate a gear (that connects with the chain band)
And I took detailed
pictures of the mechanism: a chain band around the outer ring and a hand crank to
rotate a gear (that connects with the chain band)
SSCoasters Administrator
The SSCoasters Forum Rules