Hurricane
#1
Posted 04 October 2003 - 04:39 PM
section, I am making a new coaster! As of now I have the lift, turn, drop and the
slope back up to the next hill! I should be working on it more tonite and I will
have a construction picture up then! So stay tuned!!
#2
Posted 04 October 2003 - 07:06 PM
after that hill I have no idea what it is going to do! I may make it do a swooping
drop, or I may make it do a turn like after the lift and then do a swooping drop!
WHO KNOW?????????
#3
Posted 04 October 2003 - 07:40 PM
creepy
#4
Posted 04 October 2003 - 08:46 PM
#5
Posted 04 October 2003 - 08:51 PM
really creepy
#6
Posted 05 October 2003 - 01:52 AM
fit a barrel roll in there; just a suggestion.
#7
Posted 05 October 2003 - 10:54 AM
this coaster to have any inversions. So after that hill I made a swooping drop!
Here is a pic!
#8
Posted 05 October 2003 - 12:07 PM
#9
Posted 05 October 2003 - 12:12 PM
around so it will end up travelling parrellel with the lift hill on right side o the lift hill so
it will be very compact! Then add another hill.
2003 - Thunder Twist | Iron Falcon | Insanity | Voltage | Banshee
2004 - Centaur | Polar Plunge | Chaos | Nessie | Eclipse | Desert Eagle
2005 - K2 | Jaguar
#10
Posted 05 October 2003 - 12:54 PM
cuz I am nost sure if I will run out of supports! But if I do I will most likely tear
down Oasis! HAHAHH!! Just Kidding! But if I do run
out of pieces I will prolly buy anotehr SS off of ebay or I might just buy a
trampoline tower or BBF...not sure.....the world may never know!!
Westside7th- The swooping hill will most likely go down parralel to the lift and
then do a hill or something like that, I am just not sure if I will have enough
pieces! But I do like your models in the gallery! Atleast I am not the only
one uploading now!
#11
Posted 05 October 2003 - 03:40 PM
parralel to the lift and then it does a hill, here is a pic!
#12
Posted 05 October 2003 - 03:44 PM
so it be a woodie or hyper?Originally posted by coasterfreak11@Oct 5 2003, 03:54
PM
Ya, I could fit a barrel
roll in there, but I do not want this coaster to have any inversions. So after that hill I
made a swooping drop! Here is a pic!
#13
Posted 05 October 2003 - 05:23 PM
you start a project, you just move on over to the next one! Very nice!
Can't wait to see it finished!
#14
Posted 05 October 2003 - 05:37 PM
rods that are bracing the supports at the bottom of the first hill. You don't need
to use that many.
2003 - Thunder Twist | Iron Falcon | Insanity | Voltage | Banshee
2004 - Centaur | Polar Plunge | Chaos | Nessie | Eclipse | Desert Eagle
2005 - K2 | Jaguar
#15
Posted 05 October 2003 - 05:53 PM
the rods, I have plenty of those, I just run low on the blue and purple connectors
#16
Posted 06 October 2003 - 01:26 AM
through that and then put the things on the end
like this
_-[--------]-_
key
[or]=yellow
connecter
-=rod
_=hinge
#17
Posted 06 October 2003 - 07:51 PM
Also, Rctyrant said to post the construction pics in the gallery, but when I take pics
with my digi cam and try to upload them there they are too big. So how do I resize
them?
#18
Posted 06 October 2003 - 07:56 PM
open the picture, and probably somewhere there is a function to resize the
picture.....
-Tyrant
#19
Posted 06 October 2003 - 08:26 PM
have a graphic program
#20
Posted 06 October 2003 - 08:32 PM
took on my digi camera were to big in size. I have a JPG converter program that
converts the files to smaller sizes so I can upload them.
Go to <a
href='http://atlantic.phot...com=arcsoftBann
er&awp=index3.html&DIRECT=show' target='_blank'>Photo Island</a>that is
where I downloaded the free converter. When you upload your pics, it should resize
them if they are too big. Then it will let you open them in a nother window.
2003 - Thunder Twist | Iron Falcon | Insanity | Voltage | Banshee
2004 - Centaur | Polar Plunge | Chaos | Nessie | Eclipse | Desert Eagle
2005 - K2 | Jaguar