I am trying to build Bullet @ Flamingo land. How
do I do a reversed incline?
Andrew
Need Help
Started by
The Beast
, Nov 02 2003 04:15 PM
7 replies to this topic
#1
Posted 02 November 2003 - 04:15 PM
#2
Posted 02 November 2003 - 04:50 PM
You mean a shuttle? What you do is you put a
connector on the lift so the car can catch and have blank teack at th top so the car will
release it.
connector on the lift so the car can catch and have blank teack at th top so the car will
release it.
#3
Posted 02 November 2003 - 08:52 PM
First of all which connector? I don't follow the last
half though.
I thought shuttle was to launch the train out of the station.
Andrew
half though.
I thought shuttle was to launch the train out of the station.
Andrew
#4
Posted 02 November 2003 - 09:04 PM
Shuttle just means that the train doesn't make a
complete circut but instead falls backward through it again. Like Bullet, Wicked
Twister, Montezuma's Revenge, etc.
To make a reverse lift, snap a
45 degree conector onto the chain. It will disengage at the top of the lift. I
haven't done this first hand so ask CoasterFreak11.
complete circut but instead falls backward through it again. Like Bullet, Wicked
Twister, Montezuma's Revenge, etc.
To make a reverse lift, snap a
45 degree conector onto the chain. It will disengage at the top of the lift. I
haven't done this first hand so ask CoasterFreak11.
Go Broncos!
#5
Posted 05 November 2003 - 08:56 PM
Thank you. I think that will do the trick.
It seems like it is working.
You did mean like this right? V
It seems like it is working.
You did mean like this right? V
#6
Posted 19 November 2003 - 07:05 PM
I used the 45 degree conector! The next one
bigger than that! Good luck!
bigger than that! Good luck!
#7
Posted 19 November 2003 - 07:35 PM
He used a 45 degree. Your saying you used a 90
degree connector
degree connector
#8
Posted 19 November 2003 - 08:13 PM
Yup, sorry, that is what I meant to say, sorry!