unamed invert coaster
#1
Posted 22 December 2008 - 01:47 PM
let me know what you think.
thanx CC10
#2
Posted 22 December 2008 - 01:53 PM
#3
Posted 22 December 2008 - 02:43 PM
The layout does sound possible, good luck!
╔═╦═╦═╦═╦╦═╦╦╦══╦═╦╦╦═╗
║═╣║║║║═╣║║║╩╠╗╔╣═╣╔╣╚╣
║╔╣║║║║╔╣╠╗║║║║║║═╣║╠╗║
╚╝╚═╩═╩╝╚╩═╩╩╝╚╝╚═╩╝╚═╝
EDIT by Jogumpie: Your signature image was too large.
#4
Posted 22 December 2008 - 02:51 PM
thanx CC10
#5
Posted 22 December 2008 - 03:31 PM
#6
Posted 22 December 2008 - 03:57 PM
thanx CC10
#7
Posted 22 December 2008 - 07:59 PM
thanx CC10
#9
Posted 22 December 2008 - 11:44 PM
╔═╦═╦═╦═╦╦═╦╦╦══╦═╦╦╦═╗
║═╣║║║║═╣║║║╩╠╗╔╣═╣╔╣╚╣
║╔╣║║║║╔╣╠╗║║║║║║═╣║╠╗║
╚╝╚═╩═╩╝╚╩═╩╩╝╚╝╚═╩╝╚═╝
EDIT by Jogumpie: Your signature image was too large.
#11
Posted 23 December 2008 - 12:59 AM
thanx CC10
#12
Posted 23 December 2008 - 10:17 AM
Your loops is far too tall/skinny. Also, try to take out the bumps by adjusting the crossties 'til it's smooth.
#13
Posted 23 December 2008 - 07:36 PM
The sides need to be brought in about a small gray each, and raise the top a little bit more.
#14
Posted 23 December 2008 - 08:10 PM
thanx CC10
#15
Posted 24 December 2008 - 12:44 PM
crest.
video:
here is the drop. i started on it. and it is a bit rough. so i know i have to smooth it out.
pov
comment please.
thanx CC10
#17
Posted 24 December 2008 - 12:56 PM
#18
Posted 24 December 2008 - 12:57 PM
thanx CC10
#19
Posted 24 December 2008 - 04:12 PM
Other than that and the random bumps caused by leaving large spaces with no crossties, it looks fine.
#20
Posted 25 December 2008 - 11:18 PM
thanx CC10