Typoon
#21
Posted 11 January 2004 - 01:02 PM
will need some more most likly.The hand crank sucks so ill try an idea i have for a
cable lift and hope it works.
#22
Posted 11 January 2004 - 01:23 PM
just keep it up.
#23
Posted 11 January 2004 - 05:07 PM
#24
Posted 11 January 2004 - 05:08 PM
#25
Posted 11 January 2004 - 05:10 PM
you guys think.
#26
Posted 11 January 2004 - 06:39 PM
am impressed by the height. HOw tall is it??
#27
Posted 11 January 2004 - 06:51 PM
Although there is a small bump in the track at the transition at the bottom of the hill
just as it starts to slope to horizontal.
2003 - Thunder Twist | Iron Falcon | Insanity | Voltage | Banshee
2004 - Centaur | Polar Plunge | Chaos | Nessie | Eclipse | Desert Eagle
2005 - K2 | Jaguar
#28
Posted 11 January 2004 - 06:56 PM
get everything up.Its 7'8" and its probaly one of the tallest lifts
ever.I'm going to build a loop around 4'6" to beat westsides
record.right now im working on a cable lift so im hoping it works because the chain
makes the suports look bad.The train isn't that heavy so that helps too and I plan
to spray paint it silver with black streaks.
#29
Posted 11 January 2004 - 06:58 PM
Recreations: Corkscrew@KBF Hypersonic XLC@PKD King Cobra@PKI Magnum XL200@CP Mr. Freeze@SFOT
The way some people find fault, you'd think there was some kind of reward.
#30
Posted 11 January 2004 - 07:26 PM
Race Thru the Clouds may have been even taller, but good job on the coaster so
far!
#31
Posted 11 January 2004 - 07:44 PM
belive it is taller than greg's rac thru the clouds im not sure though. but it looks
awsome.
#32
Posted 11 January 2004 - 07:45 PM
for more speed or is just for looks??
#33
Posted 11 January 2004 - 07:47 PM
how to do them.
#34
Posted 11 January 2004 - 07:59 PM
looks
good so far, but how are those floorless cars?
The people sit on the back of the
SS seats and there feet hang over so im calling them
floorless.
well if you need help with the cable lift just
ask i know how to do them.
You
had a chain lift on your MF but you can show me.The cable lift would work if the sting
could grip the wheel so im stuck with a chain lift and hand crank.
#35
Posted 11 January 2004 - 08:01 PM
act as the cable and rig up a pulley device to pull the cable up and down the lift hill.
Then attatch magnets to the bottom of the train cars and magnet strip on the cable.
2003 - Thunder Twist | Iron Falcon | Insanity | Voltage | Banshee
2004 - Centaur | Polar Plunge | Chaos | Nessie | Eclipse | Desert Eagle
2005 - K2 | Jaguar
#36
Posted 11 January 2004 - 08:04 PM
the pulley,thats why mine doesnt work.
Edit:i also started the loop.
#37
Posted 11 January 2004 - 08:05 PM
the pulley, that's one problem. Is the string supposed to go all around the lift like
a chain lift would??
#38
Posted 11 January 2004 - 08:09 PM
where
step2 atach 5 inches of cahin on to it so it is like a big loop ans he put it on
like a chain
step 3 add a hand crank
step four crank it only up to where the
gears are like a real cable lift
there you go i hope it helps.
#39
Posted 11 January 2004 - 08:15 PM
around with the string and it works! Now I just have to add
the chain or magnets and it should work and the big crappy looking chain wont get in
the way of my supports.
#40
Posted 11 January 2004 - 10:29 PM
make a cutback after the loop,make the biggest Cobra roll with good supports(unlike
squriels),or the biggest dive loop?