#1
Posted 25 August 2010 - 06:50 AM
El Chupacabra is going to be after this one. This is just going to be a warm up looper. Here are some pics:
overview 1:
overview 2:
crest:
Slightly banked pre-drop turn:
drop:
I will take out the grey rod that is on the bottom of the drop so that there will not be the sharp spot. I should have another update tomorrow or in a few hours if I have to fix something.
Next up: Immelmann
Comment!
#2
Posted 25 August 2010 - 06:53 AM
Also, you spliced the tubing right on the crest. You could try to do it somewhere else.
#3
Posted 25 August 2010 - 09:23 AM
#4
Posted 25 August 2010 - 10:52 AM
#5
Posted 25 August 2010 - 11:07 AM
The drop isn't steep enough.
But the supports look good!
Aut viam inveniam aut faciam
#6
Posted 25 August 2010 - 11:46 AM
MF | Toro | TTD | Maverick | Ka | Griffon | Nitro | Storm Runner | Skyrush | Phoenix
#7
Posted 25 August 2010 - 01:35 PM
Theres a weird thing in the middle of the pre drop turn in picture 4. I cant quite put a finger on it, but it just doesn't lok right to me. Just fix that.
Also, you spliced the tubing right on the crest. You could try to do it somewhere else.
I took the track off and fixed it.
You tried to bank the middle of the pre-drop, correct? I think it would look better without it.
You are correct. I unbanked it.
I don't like the little banking on the pre-drop, it looks ugly. You should go for no banking or you should make your drop more B&M-ish.
....
Can we get a direct top view of the turn to make sure it's circular?
The drop isn't steep enough.
But the supports look good!
I think that the the drop is defiantly steep enough.
I personally think it looks pretty good for the most part. I like the banking on the pre-drop, It reminds me of Wildfire, as does the whole coaster right now. The only problem I see is that there is a straight spot in the pullout about 2 1/2 granites off the ground. Fix that and you're good!
Yes Yes! The coaster is inspired by Wildfire. I wish I found that coaster before Coaster55! When i took the track off and put it back on yesterday because I thought I was going to cancel it, the sharp spot was gone.
Update!!
Well, I got the Immelmann done and I think that it is way better than when I tried and failed 3 times on Propeller. I think that it actually came out pretty well. Here are some pics:
Overveiw:
Immelmann:
Cool POV:
Behind View:
And top view of the pre-drop turn for Cedars:
Next up: Zero-g-roll
Comment!
#8
Posted 25 August 2010 - 01:42 PM
#9
Posted 25 August 2010 - 01:46 PM
Oh, and one thing you may notice is when you have that section of support over the top of the Immelmann, it's going to start bending down, Pretty sure it already is. Try to stablilize it and configure the supports to the track, not vice-versa.
-OL659-
TTD l I305 l MF l Maverick l Dueling Dragons l Montu l Apollo's Chariot l Raptor l Hulk l Kumba
#10
Posted 25 August 2010 - 02:23 PM
I see the top of your immelmann is fully upside down, while it shouldn't. For the rest the immelmann looks awesome. Also, the top support of the immelman looks weak, it should have some laterals to the main support.
Ok, will do so!
Firsr, like maarten said, the Immelmann shouuld be banked at the top. Second, the twist part is way stretched. Bring it to the left and down. Third, this would look way more like Wildfire if the pre-drop was banked like Coaster55's was. If you insist on keeping it though, there's a bump at the start of the turn. And a sharp spot where the drop begins. This may sound really picky, but you're at the point where you can easily fix all this...
Oh, and one thing you may notice is when you have that section of support over the top of the Immelmann, it's going to start bending down, Pretty sure it already is. Try to stablilize it and configure the supports to the track, not vice-versa.
-OL659-
How am I being picky?!?! Everyone but, RCF919 said that it looked ugly with it banked so I unbanked it, I can rebank it if you have a problem.
#11
Posted 25 August 2010 - 03:15 PM
Under construction:
Non in Progress
#12
Posted 25 August 2010 - 03:27 PM
-OL659-
TTD l I305 l MF l Maverick l Dueling Dragons l Montu l Apollo's Chariot l Raptor l Hulk l Kumba
#13
Posted 25 August 2010 - 03:42 PM
I was saying that I might've sounded picky with all the things I suggested to fix. I don't have a problem it's just a pre-drop, no big deal. Just giving my opinion, there are many others here.
-OL659-
LOL, sorry... I read that with out my glasses on..
#14
Posted 25 August 2010 - 05:14 PM
.
#15
Posted 26 August 2010 - 08:13 AM
Overview:
Drop:
Pre drop turn:
Immelmann:
Next up: loop
Comment!
#16
Posted 26 August 2010 - 09:53 AM
#17
Posted 26 August 2010 - 09:53 AM
EDIT: Posted same time as ^.
MF | Toro | TTD | Maverick | Ka | Griffon | Nitro | Storm Runner | Skyrush | Phoenix
#18
Posted 26 August 2010 - 10:02 AM
I think that it should be more circular like this.
Will do! thanks for the picture!
The top of the immelmann looks better now, but you just need to make the twist more steep. It should be around 10 degrees steeper, about a small silver/white rod back. The drop and half loop part of the immelmann look great though, nice job on those!
Thanks!
Anymore input?
#19
Posted 26 August 2010 - 12:54 PM
Also, why all the name-changes?
#20
Posted 26 August 2010 - 01:04 PM
Do what Jumpge said and you're golden.
Also, why all the name-changes?
Will do so!
Well I think that the Imnmelann is fine now. And is if it isn't them, I don't care cause I like it the way it is now! I have been working on the coaster and finished the loop. I don't think that the loop is perfect but it is ok. Here are some pics:
Overview 1:
Overview 2:
Back view:
Immelmann:
Loop:
Next up: Cobra roll
Comment!
Also tagged with one or more of these keywords: jonnycoaster, new looper
→
MMM Archive →
MMM 2012 Archive →
Poll
#3 Round About vs #6 Tron: The RideStarted by pkiknex25 , 08 Mar 2012 el chupracabra, jonny and 1 more... |
|
|
||
→
Holiday Blitz Archive →
Holiday Blitz 2011 →
Round 13 →
testkid's entryStarted by testkid , 16 Dec 2011 el chupracabra, jonny and 1 more... |
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
Canceled.Started by Jonny , 19 Jun 2011 el chupracabra, jonny and 1 more... |
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
B&M inverted! lift supportsStarted by GreenAppleW , 18 Jun 2011 jonnycoaster, longest, mcc and 1 more... |
|
|
||
K'NEX Discussion & Construction Area →
K'NEX General Discussion →
k´nex standard piecesStarted by Dragon , 30 May 2011 el chupracabra, jonny and 1 more... |
|
|