. Here are the pictures.Update #3
Update #2
1st turn
Lift overview
Picture from above the turn
Update #1
The first big turn after the first drop
The lift (of course, not completed)
Comment and give me some tips!
15 replies to this topic
#1
Newbie
-
-
- 34 posts
Construction Worker
Posted 26 September 2011 - 11:53 AM
Hey guys. My name is Tim and I've decided to move on building coasters. This is my last SS Hyper. There's no name yet, but you can suggest one if you want . Here are the pictures.
Update #3
Update #2
1st turn
Lift overview
Picture from above the turn
Update #1
The first big turn after the first drop
The lift (of course, not completed)
Comment and give me some tips!
. Here are the pictures.Update #3
Update #2
1st turn
Lift overview
Picture from above the turn
Update #1
The first big turn after the first drop
The lift (of course, not completed)
Comment and give me some tips!
#2
Josh Monster
-
-
- 491 posts
Works with Alpal.
Posted 26 September 2011 - 02:48 PM
Looking good, so far it is an improvement from your last coaster can't wait to see more.
#3
DDRman732865
-
-
- 5251 posts
Going Back for Master's for some reason
Posted 26 September 2011 - 10:01 PM
If that turn is going to be directly after the first drop, it is way too small in proportion to the height of the lift you have there.
The Jungle Beast Luminous Infernal Hurricane Forbidden Mine Expedition Sleigh Ride Volcanic Doomfire Rorschach Terminator: Clash of the Machines Rock'n'Rolla
#4
Aaron
-
-
- 636 posts
Keep Harpin' On
Posted 26 September 2011 - 10:53 PM
^ I totally agree. If you could make it wider, it would be better IMO.
#5
Newbie
-
-
- 34 posts
Construction Worker
Posted 27 September 2011 - 12:32 AM
Thank youLooking good, so far it is an improvement from your last coaster can't wait to see more.
.By the way, the building won't go so fast because I'm a bit busy with school but I think wednesday will be another update.
If that turn is going to be directly after the first drop, it is way too small in proportion to the height of the lift you have there.
Thanks for your tips. I will try to make it bigger after I've finished the lift +first drop^ I totally agree. If you could make it wider, it would be better IMO.
.
#6
Newbie
-
-
- 34 posts
Construction Worker
Posted 28 September 2011 - 10:07 AM
Update 2! Please comment - does that turn still needs to be wider/bigger?
Overview
1st turn
Lift overview
Picture from above the turn
Overview
1st turn
Lift overview
Picture from above the turn
#7
Dragon
-
-
- 1481 posts
ROAR!
Posted 28 September 2011 - 02:01 PM
i think you should make the curve bigger or make a smaller hill.also try to connect the supports.but is looking awesome!
#8
Newbie
-
-
- 34 posts
Construction Worker
Posted 28 September 2011 - 02:43 PM
I'll try to make the curve bigger and the supports are not ready yeti think you should make the curve bigger or make a smaller hill.also try to connect the supports.but is looking awesome!
. Thank you!
#9
CowmanBearPig
-
- 533 posts
In The begining....
Posted 28 September 2011 - 03:12 PM
The drop has a couple of straight spots in it they seem to be appearing where you have your orange connectors
#10
Josh Monster
-
-
- 491 posts
Works with Alpal.
Posted 28 September 2011 - 03:37 PM
Your drop is too steep and has a few straight spots on it. Extend the drop and make the track flow so it is more consistent and less choppy. It will look good once you fix that.
#11
Newbie
-
-
- 34 posts
Construction Worker
Posted 29 September 2011 - 01:11 AM
I've seen that tooThe drop has a couple of straight spots in it they seem to be appearing where you have your orange connectors
I'll try to fix it today thank you.I know the straight spots.. will fix them today. What do you mean with 'let the track flow'? I'll fix the pull-out today too.Your drop is too steep and has a few straight spots on it. Extend the drop and make the track flow so it is more consistent and less choppy. It will look good once you fix that.
#12
A.S.C.
-
-
- 801 posts
-----------
Posted 29 September 2011 - 04:57 AM
Your drop is too steep and has a few straight spots on it. Extend the drop and make the track flow so it is more consistent and less choppy. It will look good once you fix that.
Intamin drops are always that steep, I think its fine.
#13
Newbie
-
-
- 34 posts
Construction Worker
Posted 30 September 2011 - 01:53 PM
Could not fix the things today...
Will do it tomorrow
Stay tuned in.
Will do it tomorrow
Stay tuned in
.
#14
Newbie
-
-
- 34 posts
Construction Worker
Posted 01 October 2011 - 02:19 PM
Update #3!
Please help with this part. The supports don't work very well. Any suggestions?
Comment!
Please help with this part. The supports don't work very well. Any suggestions?
Comment!
#15
Josh Monster
-
-
- 491 posts
Works with Alpal.
Posted 01 October 2011 - 02:32 PM
The pull-in is way too sharp and your drop still looks like it has a couple of straight spots in it.
#16
Newbie
-
-
- 34 posts
Construction Worker
Posted 02 October 2011 - 02:51 AM
Okay, I'll make that pull-in alot better. I know about the straight spots, maby I could fix them today too. Thank you!The pull-in is way too sharp and your drop still looks like it has a couple of straight spots in it.
Also tagged with one or more of these keywords: hypercoaster
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
Unnamed Hyper New Element 11/19Started by dylpickled , 04 Aug 2017  hypercoaster, diamondback, 5ft and 2 more...
|
|
|
||
Theme Parks, Coasters, Games, & More →
Talk About Anything →
Binaural 3D SoundStarted by Micronex , 16 Jul 2012 hypercoaster
|
|
|
||
→
MMM Archive →
MMM 2012 Archive →
Poll
#1 Looping Star vs #16 Poison IvyStarted by BGTKing , 04 Mar 2012 hypercoaster
|
|
|
||
→
Company General Discussion →
VV Inc. - New EmployeesStarted by BBaller347 , 01 Apr 2010 hypercoaster
|
|
|
||
Theme Parks, Coasters, Games, & More →
Amusement & Theme Parks →
The Wizarding World of Harry PotterStarted by Shamu , 07 Jan 2010 hypercoaster
|
|
|
