.
Edited by Zem, 24 May 2016 - 04:12 AM.
First Coaster: Rage Recreation (2/16/12)
Started by
Zem
, Feb 12 2012 02:19 PM
euro fighter eurofighter rage recreation zem
17 replies to this topic
#2
Jonny
-
-
- 1648 posts
Lead Engineer
Posted 12 February 2012 - 02:23 PM
It's supported very well and the shaping looks good. It's almost as cool as a Platypus
#3
TheSUCKCrew
-
-
- 4095 posts
Way too old
Posted 12 February 2012 - 02:26 PM
I think you should use this: http://www.sscoaster...tutorial-14000/ to get better shaping. I am not sure about your pullout. I think it will be easier to judge when you have a next element, but it seems like it is not a consistent curve. The end seems to be tighter than the middle. And the transistion from the >90*part to the pullout seems sharp.
I like what you have there though, I see potential in you,
I like what you have there though, I see potential in you,
#4
Blackkitty
-
-
- 1705 posts
Meow!
Posted 12 February 2012 - 02:41 PM
He can use ladders if he wants. I would say though that Suck is right about the shaping.
#5
RNB
-
-
- 1808 posts
VV builder
Posted 12 February 2012 - 03:19 PM
Shaping is a bit off. It looks too steep, and agree with Suck further.
Supporting looks very well on the other hand. Hope you can finish this!
Supporting looks very well on the other hand. Hope you can finish this!
#6
Micronex
-
-
- 1270 posts
Another piece for my collection
Posted 12 February 2012 - 03:32 PM
The pullout looks fine to me, I don't see why everyone doesn't think it's right. I agree there is a little sharp spot, but the angle is fine.
#7
Zem
-
- 483 posts
Zemmiphobiac
Posted 12 February 2012 - 10:45 PM
.
Edited by Zem, 24 May 2016 - 04:12 AM.
#8
The Stig
-
-
- 4609 posts
Some say...
Posted 12 February 2012 - 11:48 PM
Welcome to the forums. Looks like you have coaster building experience.
Everything looks really smooth so far.
Everything looks really smooth so far.
#9
jespercoasters
-
-
- 1712 posts
Dutch Details Employee
Posted 13 February 2012 - 11:30 AM
Looking good. But because its a eurofighter some people are going to tell you that your loops needs to be more rounder and not in a teardrop shape. But it looks really great.
#10
RNB
-
-
- 1808 posts
VV builder
Posted 13 February 2012 - 12:05 PM
Drop looks perfect!
The loop needs to be rounder, like ^ said.
The loop needs to be rounder, like ^ said.
#11
Zem
-
- 483 posts
Zemmiphobiac
Posted 13 February 2012 - 04:42 PM
.
Edited by Zem, 24 May 2016 - 04:13 AM.
#12
Zem
-
- 483 posts
Zemmiphobiac
Posted 17 February 2012 - 07:19 PM
.
Edited by Zem, 24 May 2016 - 04:13 AM.
#13
~stεεlspectrum~
-
-
- 7526 posts
You ready to ride the Fist O' Pain?
Posted 17 February 2012 - 07:27 PM
It looks like you made it significantly shorter since the previous update. Were you having problems with it not making the loop?
#14
Zem
-
- 483 posts
Zemmiphobiac
Posted 17 February 2012 - 07:31 PM
.
Edited by Zem, 24 May 2016 - 04:13 AM.
#15
william0510
-
- 295 posts
Construction Worker
Posted 17 February 2012 - 08:26 PM
It looks like a good ride so far, and I can't wait to see the finishing coaster (unless it's canceled)! I give you the best of luck in your building!
#16
MichaelG
-
-
- 504 posts
Architect
Posted 19 February 2012 - 01:13 PM
I think the shaping looks very good, but I think the loop should be a bit higher. The loop is significantly lower than the top of the drop.
#17
tornado96
-
- 922 posts
VV Australia
Posted 20 February 2012 - 03:00 AM
Wow this is incredible for a new builder! Looking forward to progress!
#18
HGCoasters
-
-
- 34 posts
Construction Worker
Posted 20 February 2012 - 09:06 AM
While I do think this is definitely a great first coaster, I have to agree with MichaelG. I think the loop should be a bit higher, and guys, he obviously has some building experience already...
Still looks awesome and keep up the good work.
Still looks awesome and keep up the good work.
