7 replies to this topic

[Haaron05]

Heyy guys, well i did my research through the tutorials and found no pictures or instructions for this so i am making instructions. i recomend using your rippin rocket car if it is your only car.

#disclaimer, i do not own this idea, i give full credits to the creator of this which i dont know, well because my rippin rocket car came some of it on it and i modded it

step 1:make one (y clip can be replaced with green rod or modded rod)


step 2:make two


step 3:slip the two items you made in step 2 into the car


step 4:add step 1 onto the bottom of the car


optional step 5: this is an optional rubber band, it may cause speed loss


Haaron05

[TheSennaj]

u made that up on ur own?

COOL DUDE THX!

[Haaron05]

your welcome
I dont know why it took me this long to reply, i didn't see it pop up.
Well i didn't exactly make it up because when i got it , it had a bit of it hot glued onto it for a chain-dog so i peeled of the glue and made my own.

[TheSennaj]

it doesnt fit in the booster :C

[Haaron05]

my one does, you might have to trim the blue rods on the top of the car or use a broken cut down grey rod instead of the blue rods. ill post a pic

cut down grey rods ( saves the blue rods, and please note that they over hang a little to get grip on the car)


in booster

[CCreator12]

you could attach white rods on it like you do for an extra chain on a ss car, then you wouldnt have to cut it

[Haaron05]

the white rods can only hold 3 clip connections on it, this takes 4 of them. if you meen use y connectors under the white rod, it would sit to low.

[TheSennaj]

thx ya all