CG's Track Strengtheners
#1
Posted 10 March 2013 - 12:45 PM
The needed part are:
Tan or orange 45* connectors.
Flexi rods.
X-ties.
Half moons.
And ladders which are optional.
Ok, so here's a pic with the strengtheners being used on a coaster:
Now to the actual tutorial.
First make the section of track where you'd like the strengtheners to be placed. i used a relatively short track section, because my tutorial is based on repetition.
Next add the 45* connectors to the outer flexi rods, like this:
Then add flexi rods to the inside of the 45* connector: (stagger them for the best results, and ladders can be used to connect these together.)
Then add the half moon color of your choice:
Then add flexies to the half moon openings. (Again, ladders can be used, or like on Sniper, they can be left out)
An up-close view of the strengtheners:
As you can see in this pic it can be easily bent, but I'd suggest putting your track in place before you ad the strengtheners for the best shaping and results.
1- Time Traveler 2- Magnum XL-200 3- The Voyage 4- Velocicoaster 5-Iron Gwazi 6- Phantom's Revenge 7- The Beast 8- The Legend 9- Tiested Timbers 10- Steel Vengeance
Follow me on Instagram @coastergeek987
Credit Count: 305
#2
Posted 10 March 2013 - 01:55 PM
#3
Posted 10 March 2013 - 03:42 PM
looks awesome but i will never use because it's a flexie eater
When your collection is big enough, you always have way more flexis than necessary.
Your spine is sort of a hybrid of what exists. It's cool, and it looks effective.
The Jungle Beast Luminous Infernal Hurricane Forbidden Mine Expedition Sleigh Ride Volcanic Doomfire Rorschach Terminator: Clash of the Machines Rock'n'Rolla
#5
Posted 10 March 2013 - 05:37 PM
Comet Recreation still underway.
Proof you never grow up if you keep playing with toys!