Looks great, I can't really find anything wrong with it.
33 replies to this topic
#22
DDRman732865
-
-
- 5251 posts
Going Back for Master's for some reason
Posted 01 July 2014 - 11:44 PM
Around where the pullout is horizontal, it's a little sharp. Just barely noticeable. It looks fantastic, though.
The Jungle Beast Luminous Infernal Hurricane Forbidden Mine Expedition Sleigh Ride Volcanic Doomfire Rorschach Terminator: Clash of the Machines Rock'n'Rolla
#23
~stεεlspectrum~
-
-
- 7526 posts
You ready to ride the Fist O' Pain?
Posted 02 July 2014 - 01:02 AM
My only criticism is what ^DDRman already pointed out. I love that heartlining at the top of the drop! How strong is the twist (the part with no supports)?
#24
Yannick
-
- 614 posts
Colossos Forever
Posted 02 July 2014 - 07:09 AM
It looks very good so far, very cool!
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#25
wyomingman
-
-
- 94 posts
Construction Worker
Posted 05 July 2014 - 10:47 AM
Wow! Great job so far! I look forward to seeing this finished 
My Youtube Channel (Noah Smith) : http://www.youtube.c...GBYi6NL0c0pRnlA
Follow me on Instagram @smittyknex
#26
Cobra Roller
-
-
- 728 posts
I have all six Infinity Stones
Posted 05 July 2014 - 11:50 AM
The heartlining looks very nice, but I feel that the entire setup should be completely horizontal. Allow the dive drop to pull the the train down instead of creating a slanted track section. Otherwise, your shaping is nice and the pullin looks great.
Screen Shot 2013-01-08 at 7.33.20 PM by tennispro95, on Flickr
#27
Connector1o1
-
- 1236 posts
Basic Engineer
Posted 01 August 2014 - 11:59 AM
Test 1 on video! I didn't do much because I have had a very busy summer! I will resume building pretty soon, now that I am not busy, but for now here is a test run!
Signature not available
#28
Yannick
-
- 614 posts
Colossos Forever
Posted 01 August 2014 - 03:45 PM
The video doesn't work for me 
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#29
Gromit15
-
-
- 388 posts
Strive For Perfection
Posted 02 August 2014 - 01:00 AM
Same thing is happening for me.^ 
#31
ZachCreate
-
- 343 posts
i am very exciting...
Posted 02 August 2014 - 09:10 AM
Looks pretty good, kind of fast pacing though. Also, it shakes a bit but those are small problems, overall it looks pretty dang good.
1. Maverick 2. Millennium Force 3.Top Thrill Dragster 4. Bizarro (Six Flags New England) 5. The Beast 6. X2 7. Full Throttle 8. Banshee 9. Xcelerator 10. Medusa (Six Flags Discovery Kingdom)
#32
Connector1o1
-
- 1236 posts
Basic Engineer
Posted 08 August 2014 - 06:00 PM
Sorry about that.The video doesn't work for me
Sorry. I might try to fix it later...Same thing is happening for me.^
Hmmm,. Why does it work for some and not others...Video works fine for me.
Thanks!Looks pretty good, kind of fast pacing though. Also, it shakes a bit but those are small problems, overall it looks pretty dang good.
Signature not available
#33
Connector1o1
-
- 1236 posts
Basic Engineer
Posted 08 August 2014 - 06:08 PM
Okay guys, it's been a while sines I have worked on this project. As you may already know, Flying Sheep is coming to an end. With not enough experience and time to finish this coaster, I will have to cancel it. To be honest, I have also lost interest in it too, I'm sorry to cancel, but happy at the same time. However this does not mean that I will stop building, I have a project planned already, but I need your opinion on which one of these three ideas I should go for. Please comment!!
A - build a small twister style woodie using metallic prices.
B - build a small classic woodie using non metallic pieces
C -build a small steel coaster using metallic or non metallic pieces.
Please comment, I need your help. I also want to know if you guys are going to stop following my projects because I have canceled so many coasters. I don't mean to cancel so many rides, but at least I learned how not to make some coasters!
A - build a small twister style woodie using metallic prices.
B - build a small classic woodie using non metallic pieces
C -build a small steel coaster using metallic or non metallic pieces.
Please comment, I need your help. I also want to know if you guys are going to stop following my projects because I have canceled so many coasters. I don't mean to cancel so many rides, but at least I learned how not to make some coasters!
Signature not available
#34
Gromit15
-
-
- 388 posts
Strive For Perfection
Posted 08 August 2014 - 07:10 PM
Since there are quite a few woodies being built, I would say A Small Steel Coaster Using metallic prices.<-- (see what I did there? 
)
Sorry you had to cancel it.
EDIT--------------
Of Corse I wouldn't Stop Following your projects! I haven't finished one worthy coaster for a thread, so, I know where you're coming from.
)Sorry you had to cancel it.
EDIT--------------
Of Corse I wouldn't Stop Following your projects! I haven't finished one worthy coaster for a thread, so, I know where you're coming from.
Edited by Gromit15, 08 August 2014 - 07:13 PM.
O3O
