Edited by Coasterman345, 13 March 2015 - 09:59 PM.
#1
Posted 07 September 2014 - 05:06 PM
#2
Posted 07 September 2014 - 06:38 PM
(1)- Voyage (2)- X2 (3)- Steel Vengeance (4)- Twisted Colossus (5)- Storm Chaser [6]- Fury 325 (7)- Outlaw Run (8)- Maverick (9)- Magnum XL-200 (10)- Monster
Coaster Count: 174
Park Count: 25
#3
Posted 08 September 2014 - 05:26 AM
#5
Posted 21 October 2014 - 06:17 PM
Pics:
If you have a Kindle Fire:
Amazon.com: Fly!: Appstore for Android
#6
Posted 21 October 2014 - 08:55 PM
#7
Posted 21 October 2014 - 09:56 PM
#8
Posted 22 October 2014 - 03:25 AM
#9
Posted 22 October 2014 - 02:06 PM
#10
Posted 16 November 2014 - 07:35 PM
Looks pretty sweet, the drop is looking better, but an overview would be helpful to make sure.
Thanks, I like this build a lot too.
That looks really nice. I like the look of this coaster.
Thanks! That means a lot coming from a builder as prestigious as you.
The shaping of the looping looks really nice, but I would place the V-shaped supports lower on the loop. This will not only look better, but also make your loop a lot stronger. Changing this sounds quite drastic, but the track is strong enough, so it should be an easy fix.
Thanks! It does look a lot better now, and with no change in speed loss, it goes through it equally fast, if not faster.
The shaping looks pretty good and all, just fix the supports of the loop. You might also want to place the wheel at the end of the crest a bit higher, to make the chain run smooth.
Thank you, the supports on the loop are fixed. I will fix the tire when I add the chain.
Thanks everyone for commenting, I really appreciate it. Here are the pictures. I went through many modifications, starting with cobra roll where it was inverted the whole time. I know someone made one I can't remember who, either way, it was horrible. After that, was a backwards sidewinder, and a cruddy over banked turn, and a small hill it barely made, which was really small, and far away from the station area/base of the lift. Now ti make a right turn, into a heart line roll. I just need help on ideas for the turnaround. I really can't have it go much farther that way.
Captions at the top.
The pre-drop:
The drop:
The loop:
The turn & my EV3:
A straight spot that will annoy you because I won't fix it because I'm evil.
The Heartline roll:
My Fav pic.
How much space I'm left with. (To the wicker chest)
Test Video:
I could blame my slow progress on my brother falling on the pre-drop, but that took all of 10 minutes to fix. Oh, and I guess no one owns a Kindle Fire.
What do you think?
Edited by Coasterman345, 16 November 2014 - 07:38 PM.
#12
Posted 16 November 2014 - 08:36 PM
#13
Posted 03 December 2014 - 06:29 PM
Thanks for positive comments. Quick question, I use Silicone Spray to lube my cars, is that bad? (It's not WD-40) I can post a video with it being used. (Yes, I made a tuto a few years back, so yes, I have a high pitched child voice, get over it.)
#14
Posted 03 December 2014 - 07:05 PM
#15
Posted 03 December 2014 - 07:35 PM
#16
Posted 14 February 2015 - 05:54 PM
Here are the pics, and check another thread *hint* *hint.* I also have two videos, one of the automation, one of it almost working.
Videos:
Show some <3 today, because its Valentine's Day, and post a comment!
Edited by Coasterman345, 14 February 2015 - 05:57 PM.
#17
Posted 14 February 2015 - 06:37 PM
Silverstar Nemesis Poseidon Air Saw The Swarm Nemesis Inferno Colossus RageThe Smiler Oblivion Shockwave GeForce Apocalypse Detonator Kumali Mumbo Jumbo Atlantica Supersplash Velocity Blue Fire Megacoaster Pepsi Max Big One Wodan
If only I had more space/pieces. Delete as appropriate
#19
Posted 14 February 2015 - 09:38 PM
#20
Posted 13 March 2015 - 06:49 PM
If you don't like the shaping, just say you're building a Togo. Then nobody can complain. Simple. I hope you can get it all working again because it's a cool little ride but it's a shame you'll have to take it apart so soon.
Haha, true. It seems to be working now, thanks to some "magic."
Looks amazing actually. But there is one flaw I see. There is a green flexi that is not connected to the track. Hopefully you can get everything working at its full potential before your mom makes you take it down.
Thank you! I got that and found a few other stragglers and connected them.
I think that turn after the loop is hurting your speed a bit, not sure if there is anything you can do about that though. Hopefully you can find a way to get it working.
Actually my father and my brother came up with a genius idea. The magic, is masking tape, taping a support to the couch to make it incredibly sturdy. This is the final update, So I didn't see any big need for any pictures. Here is the final video, enjoy!