I’ve decided to take part in the “B&M Invert Competition”, so far I have half of a coaster complete, just need to do the lift, drop and interlocking corkscrew, also waiting on a booster, that should come before the end of the competition but the 3D printed bearing hubs won’t come until like a week after the competition closes, time for the pics
(Ve-rone-nara
image.jpg 194.69KB
0 downloads
These were the easiest supports and the first part I built
image.jpg 184.93KB
0 downloads
this beauty of a foot chopper, es bonito
image.jpg 194.82KB
0 downloads
first drop’s pullout and raven roll
image.jpg 173.52KB
0 downloads
A different angle of the raven roll
image.jpg 169.73KB
0 downloads
Even more raven roll, well I guess it is a new element
image.jpg 163.73KB
0 downloads
I promise this element is’nt too intense for the GP
image.jpg 155.5KB
0 downloads
That unuended support is for the first drop, I’ll show the supports more intricately in the next update, Now, Raven Rolls, the mix between a zero g roll and a reverse sidewinder, it has the whip of an old b&m invert’s corkscrew, so not too whippey, the laterals top at 0.25 and the minimum is 0.21 (no limits 2 results with custom physics, train weight 1 tonne stead of 10, this is to scale with the knex, is the plastic trains would have to be at least 10 kilos to be to scale with the real steel) the raven roll may look odd, but it’s comfortable and pretty intense so it should please both the enthusiasts and GP. That’s it for this update goodbyeeeeee!!!
Edited by CrayCray for coasters, 29 May 2020 - 07:53 PM.