16 replies to this topic

[Zorn]

I was board so i decided to make a tut for my cross track!

Just follow the steps

Step 1

Build the base



Step 2

Add this to the top of the base



Step 3

Add these pieces to the middle.



Step 4

Add some Cross ties and put 2 blue rods on the middle two track ties.



Step 5

Add these pieces



Step 6

Add some more pieces



Step 7

Make this piece



Step 8

Insert step 7 into the middle of the two track ties.



Step 9

Turn cross track over and add these pieces



Step 10

Add these to both sides



Step 11

Make these two sections



Step 12

Add step 11 to cross track



Step 13

Add the rest of the track ties



Step 14

Add 4 small Pieces of tubing to the middle of the cross track



Step 15

Add the rest of the tubing leaving just enough room for the train to pass through.



Finished cross track!

This is what it should look like.




Please tell me if there is anything hard to understand?

:suani Enjoy and comment :suani

[microman171]

Cool!!! I might try this Thanks for the tutorial. It was very good and showed it exactly.

[supportking86]

Looks efficiant(sp?), but for someone who is only a 6 month expert or so, this might not be enough. I would add more pics or steps if I were you. I know that you think its easy, and so do me, but if you want this to reach evetybody, including new builders to help them, I would take my advice. But you said that you were just bored, so I don't really expect you to do that.

SK86 :king

[BrandonR]

That gap between each cross rail seems really wide, Does the train run over it smoothly?

[zapa]

^ It has to be wide enough for the train going in the opposite ways wheels not hit the track. I'm sure it's as close as he can make it.

[Zorn]

^^^I Tried to make the tut as easy as possible (only made it 30 min) I don't really want to add more steps (The main reason i built this is so i can take apart my cross track then build it again when ever i want.) But if anyone can't figure something out then please tell me.

^^It runs pretty smoothly (And yes The tubing is as close as it can go) Here is a Video of a coaster (My coaster) with this cross track.

[Shamu]

Extremely unrealistic, but I love it! Reminds me of those Hot Wheels kits. Doesn't seem to lose too much speed either. Definitely neato.

[khai15]

i need to go get some of those orange thing that u hook track on and some of the half moon thingys with the track hook on things from ebay then i will try

[alexandgruntz]

Eh, THIS THREAD IS DEAD!

[moosey124]

I'm sorry for posting in the dead thread but i think that it should be awoken. It's a good tutorial so i'm posting to awake it. Sorry!!!

[DDRman732865]

I might use this on Forbidden Mine Expedition.

[rexdino5]

Well I my brain just hatched an idea! You could use this track vertically so it won't be as rough... I think.

[knexems]

Oh god, don't bump dead threads...

And BTW, that's a terrible idea.

[Cedars650258516]

Did you use this in a roller coaster? if so... which one?

[rexdino5]

Oh... ummm... what are dead threads?

[LukeIsLuke]

^The only things that you like to post in.

[Top_Thrill_Dragster33]

^Don't be like that.
Dead threads are threads/topics that are older than a few months. We generally don't post in them unless the creator has an update of some sort.