72 replies to this topic

[coastercrazy10]

That's not even 45*...it's like 30-35.

-CC10

[eliavlevy]

Yes, It is about 35*....
But how can you make it any other than 45*?
The only way is that on the bottom row of supports make the right side vertical rods a bit longer than the left side's one.... and that would be insanly hard

[Britfag]

I have a way,
BUT it MUST be at 45*


have the loop, turn it on its side,
create ALL of one sides connectors (3-d's) on the edge to be blue & blue,

so the real deal 3-d ones,
then have rods going at a diagonal angle and have them level them self out for the base.

[coastercrazy10]

Just wanted to give you guys a couple pictures of where i'm at so you know i'm not bluffing when i say i can make it in between 22.5(or whatever it really is) and 45 degrees:




The supports aren't the prettiest right now, but hopefully that will change soon. Tutorial should be close, depending on how my homework load is this week.

-CC10

[moosey124]

Thanks CC10!! It look AMAZING!!! I don't mean to flood you with requests but can you please make a 0g-roll after? I don't care when it's done. It's not even for the coaster i'm building right now, probably for the next one. Just whenever you have time, please make it. Thanks alot!! Keep up the great work!

[coastercrazy10]

0-G roll was the next requested anyway, so that will be the next tutorial i make after the inclined loop.

-CC10

[TripleHelix]

Actually, the inclined loop should be more towards 45 degrees. Also, it's not just a tilted loop; it's a more helix-y type of thing.

[Antinos]

If you really want to get realistic, you should add that little unbank/rebank section in the first half loop.

[coastercrazy10]

Looks an awful lot like a tilted loop to me. And the loop isn't going to be tilted more, unfortunately. These supports are the best i've been able to get and i've gone through quite a few angles(some more than this). Anything else would be too shaky.

And rollerdude, i'll do the bank/unbank part. This is just a status update.

-CC10

[moosey124]

Whats the name of the coaster that you just posted now CC10?And what do you mean by the bank/unbanked part?

[rollercoasterfanatic919]

^That is Mantis at Cedar Point. The inclined loop is pretty good, but yeah would fix up the supports. I would also make it more toward 45 degrees like TripleHelix said. Nice job!

[moosey124]

Hey CC, Sorry if I'm pestering you but what is happening with the roll? I want to build it already lol.

[LCAL]

^ he hasnt even made the incline loop tut yet, just chillax.

[lazor 22]

Okay after you so the tilted loop and roll tut can you please make a small loop tut. The highest point can be a maximun of 1 1/2 feet (smaller would be niece though). And can it use as little cross ties as posible. Thanks!

[Coasteradict]

^My loop.... How long are you going to take to build this thing?

[coastercrazy10]

Sure, if i ever can crawl my way out of this mountain of homework i have for exams.

-CC10

[Coasteradict]

^Oh I'm sorry, competely didn't realise

[moosey124]

CC10, no offence but it's been almost 2 months. Are you doing the tut or not?

[Antinos]

Most likely, he isn't working on it anymore. He has other things to do.

[martindalekboy]

im going to use that corkscrew!!!!!!!!!!