110 replies to this topic

[Kool Coaster Kid]

Spot on!!! with the exception of the POV pic, it swerves left and right to much.

OK, I fixed the track.

it looks to me like the pullout gets really small near the bottom. does anyone else see that? i think you should make the pullout just a little bit bigger near the bottom.

yah, I decided to liwer the pullout about an inch and it looks better.

^Yah, I kinda see that...maybe have the pullout start higher up if you don't want it to go totally to the ground...

I think I fixed the pullout.


Upate by thursday

[Kool Coaster Kid]

Well, here is the layout plan


Comment, tell me if somthing shoud be changed, but not TOO magor of a change...

[RCExtreme]

It's ok, but the layout looks kind of boring.
Also the drop reaches its steepest point to quickly.

[Millcreek47]

i say, put an airtime hill where pink is, MCBR at brown, Downward helix into bully hills.

^no it doesnt.

[Kool Coaster Kid]

i say, put an airtime hill where pink is, MCBR at brown, Downward helix into bully hills.

^no it doesnt.

I think Il go with that instead.

[Millcreek47]

it would look better. and the ride wouldnt be as boring.

but the layout looks kind of boring.

[Kool Coaster Kid]

Update

Fixed drop!(its straighter thenit looks, the camra is at an od angle)


Pullout ( Its bigger then it looks, I was like 3 feet from it)


Camel back


Oveview



COMMENT!!!!!!!!!!!

[Little Kuriboh]

Looks good. Connect the pullin to the camelback to the spine of the camel back its kind of bending.

[G Force]

I would use more X-ties, it makes your coaster smoother and it looks better. The coaster looks good, but you could make the camel back a little taller.

[Kool Coaster Kid]

Looks good. Connect the pullin to the camelback to the spine of the camel back its kind of bending.

I will do that later. That support is just tempery.

I would use more X-ties, it makes your coaster smoother and it looks better. The coaster looks good, but you could make the camel back a little taller.

The train just coasts over the camelback and I dont like to weight my cars.

More comments!!!!!!!!!

[Kool Coaster Kid]

Update

I will start to take name suggestions!!!

This is a little different because I changed the layout.

Over view


Crest


Pullout


Cool Pic




COMNMENT!!

[BGTKing]

What element do you plan to add next?

Otherwise, it's looking good. Keep up the good work.

[griffon14]

It looks good, but i have a problem with your supports.
In the last pic, i noticed that you have half-moon connectors attatched to a yellow rod so it can slid back and forth. i think you should use two white rods connected to a half-moon to keep the supports in the middle. if it can slid freely than it will make the track bumpy and bent. if you need a pic ask. i think that fixing this will get you a lot of speed.

[Kool Coaster Kid]

What element do you plan to add next?

Otherwise, it's looking good. Keep up the good work.

Thanks
I plan to ad a turn around tning.

It looks good, but i have a problem with your supports.
In the last pic, i noticed that you have half-moon connectors attatched to a yellow rod so it can slid back and forth. i think you should use two white rods connected to a half-moon to keep the supports in the middle. if it can slid freely than it will make the track bumpy and bent. if you need a pic ask. i think that fixing this will get you a lot of speed.

It dont move but il put extra supports.


MORE COMMENTS!!
UPDATE LATER TODAY!

[qwertyuiop]

^ the only thing to comment is there is a straighter spot in the pullout here:

[DeAzncy]

^not really...


KCK: looks good, move on.

[qwertyuiop]

^ yes it has:

[~G3n3rOo2256~]

Sorry, but I dont think that layout will win you the MOTY

[Fraggie]

^how can you judge that now? it is just a lift, drop and a hill. it looks good koolcoasterkid.

[DeAzncy]

^ yes it has:

that isnt a straight spot... it's bending

MOVE ON...