I was buliding a lift for a coaster, I though about using duct tape, and no tubing to save some tubing Im not sure if it would work or not, But its just a idea.
4 replies to this topic
#1
scott
-
-
- 566 posts
Architect
Posted 11 July 2010 - 01:39 AM
Skype: ksbf113
Steam: rodimus113
MC and XBL: rodimuz
PC:
amd a4-3420, r5 230, 8gb ddr3 1333
#2
Old_Hag
-
-
- 2205 posts
Lead Engineer
Posted 11 July 2010 - 04:00 AM
It is really hard to get the residue off the pieces once you take the tape off. I wouldn't do it. Unless you want your pieces to be sticky.
#3
TheSUCKCrew
-
-
- 4095 posts
Way too old
Posted 11 July 2010 - 04:43 AM
I shouldn't do it because of what he^ said, and it makes a lot friction and sounds really annoying.
#4
LukeIsLuke
-
- 637 posts
Entry Engineer
Posted 11 July 2010 - 10:14 AM
You don't even really need tubing for the car part. Gump's Gumpinator ran on the chain without tubing for his test videos. And do you mean tape the middle part? I think you could do that so it wouldn't snag.
[SIGPIC][/SIGPIC]
#5
the_burrito_master
-
-
- 2879 posts
mili force 10 years late.
Posted 11 July 2010 - 07:14 PM
I don't see why not just solong as the tape inst the gooy and gets stuck on to badly.
