New Arrow Style Hypercoaster
Started by
Helix123
, May 28 2011 09:17 PM
arrow helix123 hyper coaster out-and-back
10 replies to this topic
#1
Posted 28 May 2011 - 09:17 PM
I was bored, so after a two year hiatus I pulled out the knex and got to work.
Two and a half weeks later, this is what I came up with...
Name: (Insert Name Here.)
Height 6.5 red rods.
Length: About 55ft.
Track Style: Arrow Dynamics "Out 'n' Back" hyper.
Elements (In order):
Station
Turnaround
Lifhill/first drop.
Airtime hill.
Slight left curve
Turnaround
MCBR/drop
Slight right curve
Airtime hill
Airtime hill
Helix (downward)
Brake run
Here's a few pictures of the coaster. Because pictures are worth a thousand words. Or at least a few paragraphs.
PS: I know my drops are straight, they're supposed to be like that. (Arrow style yeah!)
PPS: If you see any sharp spots, or warped track, please point it out. I'm actively adjusting this thing to perfection.
Two and a half weeks later, this is what I came up with...
Name: (Insert Name Here.)
Height 6.5 red rods.
Length: About 55ft.
Track Style: Arrow Dynamics "Out 'n' Back" hyper.
Elements (In order):
Station
Turnaround
Lifhill/first drop.
Airtime hill.
Slight left curve
Turnaround
MCBR/drop
Slight right curve
Airtime hill
Airtime hill
Helix (downward)
Brake run
Here's a few pictures of the coaster. Because pictures are worth a thousand words. Or at least a few paragraphs.
PS: I know my drops are straight, they're supposed to be like that. (Arrow style yeah!)
PPS: If you see any sharp spots, or warped track, please point it out. I'm actively adjusting this thing to perfection.
[SIGPIC][/SIGPIC]*Updated For 2012*
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
#2
Posted 28 May 2011 - 10:28 PM
Looks great!!
The only spot I see of concern, is the valley before the turn around. It kinda curves, flat, curves. (I know Arrow likes awkward transitions), but it just feels out of place, when I see your other valleys are more consistent in the curve.
The only spot I see of concern, is the valley before the turn around. It kinda curves, flat, curves. (I know Arrow likes awkward transitions), but it just feels out of place, when I see your other valleys are more consistent in the curve.
[SIGPIC][/SIGPIC]
#3
Posted 29 May 2011 - 04:45 AM
Cool layout, but there're a few bad points:
- Arrows DON'T have a straight part before the drop, that's Togo.
- Arrows DON'T have a MCBR
- Please make the supports Arrow-ish.
Move on, it's an epic layout!
- Arrows DON'T have a straight part before the drop, that's Togo.
- Arrows DON'T have a MCBR
- Please make the supports Arrow-ish.
Move on, it's an epic layout!
#4
Posted 29 May 2011 - 06:37 AM
^Then it would have to either be a Morgan or a Togo.
This is actually surprisingly good! The helix's shaping looks perfect!
This is actually surprisingly good! The helix's shaping looks perfect!
Formally RK500
#5
Posted 29 May 2011 - 07:10 AM
Thank you guys for the comments!
Ickus- I will re-profile that turn today, and see if I can't get it a little bit smoother.
RNB- Point 1: I agree with you on the straight spot on the top of the lift, but that was due more to necessity than anything else. I'll see if it's possible to fix it.
Point 2: Not necessarily. Both desperado and Titan are Arrow hypers with MCBR's.
Point 3: How so? Should I change the low height supports to tubes? If your could elaborate a bit that would be great.
RollerKid500: Thanks! I really am trying to make this coaster as refined as an Arrow can be, and it's great to hear that my effort is not a complete waste...hehe.
I will have more pictures up today. Thank you!
Ickus- I will re-profile that turn today, and see if I can't get it a little bit smoother.
RNB- Point 1: I agree with you on the straight spot on the top of the lift, but that was due more to necessity than anything else. I'll see if it's possible to fix it.
Point 2: Not necessarily. Both desperado and Titan are Arrow hypers with MCBR's.
Point 3: How so? Should I change the low height supports to tubes? If your could elaborate a bit that would be great.
RollerKid500: Thanks! I really am trying to make this coaster as refined as an Arrow can be, and it's great to hear that my effort is not a complete waste...hehe.
I will have more pictures up today. Thank you!
[SIGPIC][/SIGPIC]*Updated For 2012*
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
#6
Posted 29 May 2011 - 10:52 AM
A quick POV I just took...
Here is the revised lift peak.
Here is the revised curve.
Here is another picture of the helix.
Station Platform.
Super high torque drill lift!
Here is the revised lift peak.
Here is the revised curve.
Here is another picture of the helix.
Station Platform.
Super high torque drill lift!
[SIGPIC][/SIGPIC]*Updated For 2012*
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
#7
Posted 29 May 2011 - 11:05 AM
Try using the default yellow ration. It should help the shaking.
Formally RK500
#8
Posted 29 May 2011 - 11:06 AM
Try using the default yellow ration. It should help the shaking.
Huh, do you mean restructure it with a yellow base rod?
[SIGPIC][/SIGPIC]*Updated For 2012*
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
#9
Posted 29 May 2011 - 11:08 AM
^Yes. But don't do it on this coaster. Use it on your next.
Formally RK500
#10
Posted 29 May 2011 - 11:09 AM
you seem not having a ot of pieces but it's a great coaster you have here !
[SIGPIC][/SIGPIC]
#11
Posted 29 May 2011 - 07:44 PM
I threw together a video for the new ride.
If you have any name suggestions, I'm more than happy to take them!
Thanks for watching!
'
If your connection can stream it, watch in high definition (720p).
If you have any name suggestions, I'm more than happy to take them!
Thanks for watching!
'
If your connection can stream it, watch in high definition (720p).
[SIGPIC][/SIGPIC]*Updated For 2012*
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers
Red Comet Backyard Coaster!
Rose-Hulman Institute of Technology Class of 2015
B.S. Mechanical Engineering
Fightin' Engineers