Dive Coaster: Demandosigno (COMPLETE CIRCUIT)
#21
Posted 06 August 2014 - 02:54 PM
What do you think about changing the layout?
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#22
Posted 18 August 2014 - 06:38 AM
Is the transition into it good and does it need more banking?What do you think?
Pictures:
Please comment!
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#23
Posted 18 August 2014 - 10:46 AM
[SIGPIC][/SIGPIC]
Pigs are better when green.
#24
Posted 18 August 2014 - 03:33 PM
#25
Posted 19 August 2014 - 12:30 PM
I think it looks good so far. Naturally, you would lose speed quick since only 1 car doesn't weigh that much. I like what you have.
I knew that I will lose speed quick with that but I try it.Thanks
Shaping and banking looks good to me, I would just beef up the supports in the turn and transition between the elements.
Thank you! I first care about shaping and then I will add more track to support connections
For now just a video:)
Edited by Sputnnik, 19 August 2014 - 12:33 PM.
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#26
Posted 19 August 2014 - 02:56 PM
Screen Shot 2013-01-08 at 7.33.20 PM by tennispro95, on Flickr
#27
Posted 27 August 2014 - 03:19 PM
The speed through that overbanked turn is great. Maybe you can raise it a bit higher. Other than that, this is quite nice so far.
I raised it a little bit, the speed doesn't look as great before but it's ok. Thank you!
I nearly finished the next element. I just have to add more supports. This is sort of an overbanked turn.
Pictures:
Edit: I already can see a bump on the top-left of the turn, or am I wrong?
Do you have any suggestion, because I think it could be better:)
Edited by Sputnnik, 27 August 2014 - 03:29 PM.
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#28
Posted 27 August 2014 - 04:16 PM
I like the shape of the helix and the way it spirals around the support for the lift. But I noticed a couple things about the track itself. First, it looks like both flexi-rods in the track are ending about the same spot. That's typically the reason for sharp spots. Try to layer them so that one flexi ends around the middle of the other one. A lot of builders use 3 flexi-rods by putting another one in the middle connection (not the center hole, but the clip on the bottom of the X-tie), and that helps avoid sharp spots. Also, there's some areas where the flexi-rod isn't snapped into the X-tie all the way.
#29
Posted 30 August 2014 - 04:01 PM
I'm curious to know, what method do you use for adding new track?
I like the shape of the helix and the way it spirals around the support for the lift. But I noticed a couple things about the track itself. First, it looks like both flexi-rods in the track are ending about the same spot. That's typically the reason for sharp spots. Try to layer them so that one flexi ends around the middle of the other one. A lot of builders use 3 flexi-rods by putting another one in the middle connection (not the center hole, but the clip on the bottom of the X-tie), and that helps avoid sharp spots. Also, there's some areas where the flexi-rod isn't snapped into the X-tie all the way.
Thank you for your helpful advice Ryan!
I explain you how I add new track with this picture:
I first add new flexies and connect it to a crosstie. Then I build the base, and put some crossties on the flexis. After that I put on the Track-to-Support connections. Finished:)
__________________________________________________
Now come to the real update.
I had a cool idea and added anothe overbanked turn so it looks like an 8:
Does it look good?
Overview:
Comment;)
Edited by Sputnnik, 30 August 2014 - 04:08 PM.
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#31
Posted 31 August 2014 - 02:57 PM
Looks cool! How much speed does it have when it comes out? If you use a spine or other track strengthener, you should use it fore more than 6 inches.
So much speed that it pass the small hill at the end with little speed
________________
WE HAVE A COMPLETE CIRCUIT!!!
I added a small hill which leads into a brake run, into the station. Today I decided to enter it to the summer heat contest and I had to raise everting one yellow rod. I built the whole day on the coaster and now my back is hurting.I'm very proud of my coaster and my parents say that it is the best coaster I made:)
PICTURE TIME!
BRAKE RUN
EDIT:
What do think of this logo? I choose this because my coaster looks like an 8 too.
Comment and tell me what you think of this coaster;)
Edited by Sputnnik, 31 August 2014 - 03:03 PM.
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#32
Posted 31 August 2014 - 03:52 PM
You can't enter this in Summer Heat though, it has inversions and Hypers O' Plenty does not allow Inversions.
#33
Posted 31 August 2014 - 04:17 PM
Is it good nonetheless?
Edited by Sputnnik, 31 August 2014 - 04:25 PM.
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#34
Posted 31 August 2014 - 05:03 PM
Screen Shot 2013-01-08 at 7.33.20 PM by tennispro95, on Flickr
#36
Posted 01 September 2014 - 12:03 AM
Coaster Count: 84
Check out My new Eurofighter
1- Colossos 2- Tatsu 3- Formula Rossa 4- Kraken 5- BlueFire 6- Hulk 7- Dragon Challenge 8- X2 9- Scream(SFMM) 10- Krake
#37
Posted 01 September 2014 - 05:33 AM