Water Rush
Started by
~G3n3rOo2256~
, Jun 10 2009 05:22 PM
2009 hydra kaibutsu manta noxious top model
246 replies to this topic
#161
coastermaniac
-
-
- 1862 posts
Lead Engineer
Posted 07 July 2009 - 03:06 PM
Not as wide as my drawing but you get the idea
[SIGPIC][/SIGPIC]
1|Tatsu 2|KK 3|Montu 4|Medusa 5|Kumba 6|Nitro 7|Goliath 8|Goliath 9|DD:F 10|Excalibur
#162
SwimZONE
-
-
- 2654 posts
Models of ships are hard.
Posted 07 July 2009 - 03:51 PM
^No, the pull-out's fine as it is, it's trouble after 90*
Generoo, make the top half like a quarter circle. Also have it twist before the top.
Generoo, make the top half like a quarter circle. Also have it twist before the top.
Maverick | X2 | Millenium Force | Top Thrill Dragster | Tatsu
Wild Thing | Renegade | Goliath | Raptor | Mantis
#163
~G3n3rOo2256~
-
-
- 1263 posts
the knex kid
Posted 07 July 2009 - 04:32 PM
so just fix the top? anyways I have an update:
So the twist is fine, it just can't be upside down at the top?
So the twist is fine, it just can't be upside down at the top?
#164
DeAzncy
-
-
- 1389 posts
Lead Engineer
Posted 07 July 2009 - 04:34 PM
just follow coastermaniac's line...
EDIT: you didnt follow his line.
EDIT: you didnt follow his line.
^Thnx CC10^
#165
~G3n3rOo2256~
-
-
- 1263 posts
the knex kid
Posted 08 July 2009 - 02:09 PM
Hows this:
Notice how in the last pic the top isnt upside down. Please comment quick I have a lot of time to work on it tonight.
Notice how in the last pic the top isnt upside down. Please comment quick I have a lot of time to work on it tonight.
#166
NitroDude319
-
-
- 1846 posts
Compact or Nothing
Posted 08 July 2009 - 02:24 PM
Ok looking better. Also you might want to add some flexis.
#167
~G3n3rOo2256~
-
-
- 1263 posts
the knex kid
Posted 08 July 2009 - 02:40 PM
ok^ thanks. Once I add flexis, Can I move on?
#168
Coaster55
-
-
- 1591 posts
Aminspec Employee
Posted 08 July 2009 - 02:43 PM
The turning pull out needs to be banked, and the top half of the loop isn't a quarter circle.
#169
~G3n3rOo2256~
-
-
- 1263 posts
the knex kid
Posted 08 July 2009 - 02:45 PM
I will bank the bottum and add more flexis then I am moving on.
#170
SwimZONE
-
-
- 2654 posts
Models of ships are hard.
Posted 08 July 2009 - 03:05 PM
No...I see the problem now. You want it to be that high, and you won't lower it. lower the top half and have it be circular. Also listen to what ^^ and ^^^^ said.
Maverick | X2 | Millenium Force | Top Thrill Dragster | Tatsu
Wild Thing | Renegade | Goliath | Raptor | Mantis
#171
fireskull24
-
-
- 102 posts
Oh yeah!
Posted 08 July 2009 - 08:20 PM
try to make your immelmann look more like the attached picture...
[SIGPIC][/SIGPIC]
Top 5:
1: El Toro
2: Apollo's Chariot
3: Alpengeist
4: Fahrenheit
5: KingDa Ka
#172
coastermaniac
-
-
- 1862 posts
Lead Engineer
Posted 08 July 2009 - 08:27 PM
White line is where it starts to be bad, black line is what you HAVE to do and red is what you have to put up your ass. Ok not up your ass but change this completely.
[SIGPIC][/SIGPIC]
1|Tatsu 2|KK 3|Montu 4|Medusa 5|Kumba 6|Nitro 7|Goliath 8|Goliath 9|DD:F 10|Excalibur
#173
~G3n3rOo2256~
-
-
- 1263 posts
the knex kid
Posted 09 July 2009 - 02:42 PM
I did what you said to do
Over View^
loop and twist^
and full twist^ EDIT: I forgot to put a pic up, but the twist starts to twist a little bit before the top of the loop
Over View^loop and twist^and full twist^ EDIT: I forgot to put a pic up, but the twist starts to twist a little bit before the top of the loop
#174
~stεεlspectrum~
-
-
- 7526 posts
You ready to ride the Fist O' Pain?
Posted 09 July 2009 - 03:00 PM
It should start twisting sooner, and the pullout shouldn't be so steep:
Also, there's a huge spot with no supports.
Also, there's a huge spot with no supports.
#175
knexems
-
-
- 887 posts
Aminspec Employee
Posted 09 July 2009 - 03:03 PM
Have you even looked at a real immelman at any point yet? It's STILL way too tall/skinny.
]
<---If only...
#176
~G3n3rOo2256~
-
-
- 1263 posts
the knex kid
Posted 09 July 2009 - 03:15 PM
I thought I did what ^^^ told me to do
#177
~G3n3rOo2256~
-
-
- 1263 posts
the knex kid
Posted 10 July 2009 - 07:19 PM
Should it look like this:
Blue=supports
Red=what it should look like
Quick comments please
Blue=supports
Red=what it should look like
Quick comments please
#179
knexems
-
-
- 887 posts
Aminspec Employee
Posted 10 July 2009 - 07:31 PM
Yes, basically. The middle of the pullout should be pulled down a little.
]
<---If only...
Also tagged with one or more of these keywords: 2009, hydra, kaibutsu, manta, noxious, top model
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
Catapult CANCALLEDStarted by Sniggeh , 06 Feb 2011  2010, atm, top model
|
|
|
||
→
Summer Heat / Model of the Year Archive →
Summer Heat 2010 →
Summer Heat Entry ThreadStarted by BGTKing , 28 Sep 2010 2009, christmas, coaster, knex
|
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
Prever constructionStarted by finrollercoaste09 , 23 Sep 2010 2009, ssc
|
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
InvertigoStarted by ~stεεlspectrum~ , 01 Jul 2010 2009, tube supports, unknown
|
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
??? (Update: August 7, 2010)Started by Kool Coaster Kid , 23 Jun 2010 2009, christmas, coaster, knex
|
|
|
