Jump to content




Better Dive Coaster Cars Tutorial

cars dive coaster tutoial

  • Please log in to reply
10 replies to this topic

#1 Wildcard720

Wildcard720

    When in doubt: C4!!!

  • PipPip
  • 12 posts

Posted 23 July 2009 - 01:02 PM

I have had this design for a dive coaster car for a long time and decided to post it today after i got bored. Here it is:

First u will need the pieces that are show below. There are 22 red conectors, and 38 blue spacers, 6 gray rods, and 4 yellow connectors for those of u who are too lazy to count

[ATTACH]4950[/ATTACH]

Next u will need to make what is shown below

[ATTACH]4951[/ATTACH]

Now take that and add pieces as shown

[ATTACH]4952[/ATTACH]

Next you want to make another section that is like this

[ATTACH]4953[/ATTACH]

Connect the first two sections like so

[ATTACH]4954[/ATTACH]

Now make what is shown in this picture. This represents what is used for the splashdown

[ATTACH]4955[/ATTACH]

Now use the part you just made for the sides of the last section

[ATTACH]4956[/ATTACH]

Once u have done this connect the section as shown

[ATTACH]4957[/ATTACH]

Change the front of ur SS car with the back of a RR car. You do not have to do this but it helps greatly

[ATTACH]4958[/ATTACH]

Now all you have to do is connect the sections onto the car like so

[ATTACH]4959[/ATTACH]

Comment on what u think and/or things i can do to improve this design


#2 Little Kuriboh

Little Kuriboh

    ωτς

  • 486 posts

Posted 23 July 2009 - 01:55 PM

There is room for improvement in the middle car...


#3 Wildcard720

Wildcard720

    When in doubt: C4!!!

  • PipPip
  • 12 posts

Posted 23 July 2009 - 02:01 PM

Ill take that into consideration


#4 Little Kuriboh

Little Kuriboh

    ωτς

  • 486 posts

Posted 23 July 2009 - 02:02 PM

i re looked at it. it doenst look like the seats givve the car alot of options to move. i would raise it about a small black or gray.


#5 Wildcard720

Wildcard720

    When in doubt: C4!!!

  • PipPip
  • 12 posts

Posted 23 July 2009 - 02:07 PM

I have considered this. Once u have built it though u will see how the front wheels can go up to a 45 degree angle without bumping into the seats. I may raise it a tad more though so i can avoid any problems of that sort.


#6 Little Kuriboh

Little Kuriboh

    ωτς

  • 486 posts

Posted 23 July 2009 - 02:10 PM

looks good then.


#7 Wildcard720

Wildcard720

    When in doubt: C4!!!

  • PipPip
  • 12 posts

Posted 23 July 2009 - 02:13 PM

Hey i have a really nice 4th deminsion car sitting at my desk right now. Do u think i should go ahead and post a tutorial???


#8 Little Kuriboh

Little Kuriboh

    ωτς

  • 486 posts

Posted 23 July 2009 - 02:15 PM

sure but i would like to see some more work on the dive coaster.


#9 Wildcard720

Wildcard720

    When in doubt: C4!!!

  • PipPip
  • 12 posts

Posted 23 July 2009 - 02:19 PM

..........


#10 Wildcard720

Wildcard720

    When in doubt: C4!!!

  • PipPip
  • 12 posts

Posted 23 July 2009 - 02:23 PM

Here is just a quick little pick of what my 4th deminsion coaster car looks like

[ATTACH]4960[/ATTACH]


#11 Little Kuriboh

Little Kuriboh

    ωτς

  • 486 posts

Posted 23 July 2009 - 02:55 PM

please dont DP (double post) just edit your first post and include the pic






Also tagged with one or more of these keywords: cars, dive coaster, tutoial