I have had this design for a dive coaster car for a long time and decided to post it today after i got bored. Here it is:
First u will need the pieces that are show below. There are 22 red conectors, and 38 blue spacers, 6 gray rods, and 4 yellow connectors for those of u who are too lazy to count
[ATTACH]4950[/ATTACH]
Next u will need to make what is shown below
[ATTACH]4951[/ATTACH]
Now take that and add pieces as shown
[ATTACH]4952[/ATTACH]
Next you want to make another section that is like this
[ATTACH]4953[/ATTACH]
Connect the first two sections like so
[ATTACH]4954[/ATTACH]
Now make what is shown in this picture. This represents what is used for the splashdown
[ATTACH]4955[/ATTACH]
Now use the part you just made for the sides of the last section
[ATTACH]4956[/ATTACH]
Once u have done this connect the section as shown
[ATTACH]4957[/ATTACH]
Change the front of ur SS car with the back of a RR car. You do not have to do this but it helps greatly
[ATTACH]4958[/ATTACH]
Now all you have to do is connect the sections onto the car like so
[ATTACH]4959[/ATTACH]
Comment on what u think and/or things i can do to improve this design
Better Dive Coaster Cars Tutorial
Started by
Wildcard720
, Jul 23 2009 01:02 PM
cars dive coaster tutoial
10 replies to this topic
#1
Posted 23 July 2009 - 01:02 PM
#2
Posted 23 July 2009 - 01:55 PM
There is room for improvement in the middle car...
#3
Posted 23 July 2009 - 02:01 PM
Ill take that into consideration
#4
Posted 23 July 2009 - 02:02 PM
i re looked at it. it doenst look like the seats givve the car alot of options to move. i would raise it about a small black or gray.
#5
Posted 23 July 2009 - 02:07 PM
I have considered this. Once u have built it though u will see how the front wheels can go up to a 45 degree angle without bumping into the seats. I may raise it a tad more though so i can avoid any problems of that sort.
#6
Posted 23 July 2009 - 02:10 PM
looks good then.
#7
Posted 23 July 2009 - 02:13 PM
Hey i have a really nice 4th deminsion car sitting at my desk right now. Do u think i should go ahead and post a tutorial???
#8
Posted 23 July 2009 - 02:15 PM
sure but i would like to see some more work on the dive coaster.
#9
Posted 23 July 2009 - 02:19 PM
..........
#10
Posted 23 July 2009 - 02:23 PM
Here is just a quick little pick of what my 4th deminsion coaster car looks like
[ATTACH]4960[/ATTACH]
[ATTACH]4960[/ATTACH]
#11
Posted 23 July 2009 - 02:55 PM
please dont DP (double post) just edit your first post and include the pic
Also tagged with one or more of these keywords: cars, dive coaster, tutoial
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
Custom cars and upgrades with helpStarted by thegamingninja , 19 Jan 2021 knex, custom, cars, wheels and 2 more... |
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
B&M Dive CoasterStarted by Jumpge , 08 Feb 2017 b&m dive coaster, b&m and 2 more... |
|
|
||
→
SSC Awards Archive →
SSC Awards 2014 →
Poll
VOTE: Best StyleStarted by pkiknex25 , 22 Dec 2014 cars, lubing, oil |
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Coaster Construction →
WildstarStarted by Ston , 05 May 2014 cars, lubing, oil |
|
|
||
K'NEX Discussion & Construction Area →
K'NEX Building Help →
K'NEX Tutorials →
Hanging carsStarted by BobbyJackT , 10 Jan 2014 bobbyjackt, cars, custom and 1 more... |
|
|