#21
Posted 08 July 2011 - 10:37 AM
You can see it here:
MP-Xpress (Movie Park Germany)
[SIGPIC][/SIGPIC]
#22
Posted 09 July 2011 - 05:43 AM
#23
Posted 13 July 2011 - 03:21 PM
Pictures:
Do you think the shaping is good?
[SIGPIC][/SIGPIC]
#24
Posted 13 July 2011 - 03:39 PM
#25
Posted 14 July 2011 - 02:27 AM
#26
Posted 14 July 2011 - 03:02 AM
-=Tk=-
#27
Posted 14 July 2011 - 05:55 AM
Just do what TK said, then it's fine.
Good luck!
#28
Posted 27 July 2011 - 05:12 AM
After one week vacation, I continued to build on my coaster. I've made the first part of a sea serpent roll and want to know if the shaping is good. If so, then I'll make the other half.
Overviews:
Sea serpent roll:
The twist:
Reversed POV:
Please comment!
[SIGPIC][/SIGPIC]
#29
Posted 27 July 2011 - 05:39 AM
Official Builders of Faith Member
#30
Posted 27 July 2011 - 06:57 AM
So far it looks good, though I would suggest using the black clips with a flexie in the middle also, as the black clips do not tend to hold onto flexies as will as the X tie does.
Everything is looking great keep it up.
[SIGPIC][/SIGPIC]
#31
Posted 27 July 2011 - 09:04 AM
Automation is my specialty
If only I had more space/pieces/time.
#33
Posted 29 July 2011 - 01:50 PM
the shaping looks good. But because i am a vv builder why do you have the black clips on the crossties?
If I do not, then it becomes very bumpy.
The roll over is looking good so far. Check out Alpal's heartline roll tut, it is a great jig to make the heartline at the top of the roll over.
So far it looks good, though I would suggest using the black clips with a flexie in the middle also, as the black clips do not tend to hold onto flexies as will as the X tie does.
Everything is looking great keep it up.
Thanks for your comment. I don't think the heartline roll tut will work because it is an inverted coaster. I added black clips in the middle and it looks good. Don't you think?
The shaping of the sea serpent roll is pretty good, but I noticed a sharp spot near the bottom of the turning drop.
I think I've fixed it, thanks for spotting it.
That looks great, It looks like you'll make it with plenty of speed to spare.
-AsM
I thought so, but:
CLICK!
I think the train doesn't makes it, because the center of gravity is too far from the track. Do you think I can solve it by putting weight under the train?
[SIGPIC][/SIGPIC]
#34
Posted 29 July 2011 - 03:55 PM
#35
Posted 08 August 2011 - 09:05 AM
[SIGPIC][/SIGPIC]
#36
Posted 08 August 2011 - 09:38 AM
#37
Posted 08 August 2011 - 09:30 PM
Definitely add weight under the cars. I recommend 20-25 pennies under each car. Then make sure that the drop and sea serpent don't shake. If they do, add more support. Good luck!
MF | Toro | TTD | Maverick | Ka | Griffon | Nitro | Storm Runner | Skyrush | Phoenix
#38
Posted 14 August 2011 - 09:58 AM
Please comment.
[SIGPIC][/SIGPIC]
#40
Posted 14 August 2011 - 10:14 AM