25 replies to this topic

[mynci321]

I started building again, and this time with SS! I'm really excited about this coaster, and I hope it will come out well. I have completed the lift, and most of the drop. Here are the pics:











The layout will remain a secret (until I finish it in nL )

Comment!

[rollercoasterfanatic919]

I think the pre-drop should be a bit longer, and the drop itself needs to be sharper towards the top and a bit less steep, considering I think you're going for a 1st gen. B&M hyper look. Here's a reference picture.



Good luck, I think this will turn out well though!

[~stεεlspectrum~]

RCF is right, the pre-drop should be longer and the drop should be sharper toward the top. Good luck!

[mynci321]

I worked on the pre-drop and drop, how does it look?









The pre-drop still isn't as long as on raging bull, but its longer than before.

Comment!

[Kraken]

Yep..that i still your problem. Make it longer so your whole train can fit in it.

[maarten12]

make it longer yea, and your drop looks good. Does someone know why there are predrops on hypers? it looks so strange to me

[~stεεlspectrum~]

It doesn't have to be as long as your whole train, but at least make it about a granite longer. It should be perfectly flat and straight too...

[the_burrito_master]

I think the predrop needs to a bit lower and a gray longer.

[mynci321]

Well, lets hope its good on the third try.



As you can see, I made the pre-drop longer and made the drop smoother.

Comment!

EDIT: I know the drop is a bit steep, but I like it that way.

[Kraken]

Now its gorgeous. Go Sferico!

[BBaller347]

Yea that looks much better. Why don't you put on some tubing?

[Fraggie]

this looks better, but can we have some pics with tubing and a direct side view? looking much better than before though, keep it up.

[~stεεlspectrum~]

Looks much better, I'd like to see it with tubing now.

[mynci321]

Now its gorgeous. Go Sferico!

Thanks and go Sferico!

Yea that looks much better. Why don't you put on some tubing?

Thanks, I wanted to get the shaping perfect before I bothered with tubing.

this looks better, but can we have some pics with tubing and a direct side view? looking much better than before though, keep it up.

I will be difficult to get a direct side view with the wall in the way, but I will try.

Looks much better, I'd like to see it with tubing now.

I will put on tubing later today when I get around to it.

Comment!

[SwimZONE]

Looks awesome! but I think you might need the pull-out bigger.

[mynci321]

I added tubing, and made a small turn at the bottom. How does it look?
Here are the pics:









Comment!

[RCT2123]

The drop looks good, but I think you should stick with a straight pullout. The turning one would need to be completely redone, and they are a real pain to learn how to do...

If you are that interested in keeping it let me know. I will draw you a picture and show you how the pullout should be...

-RCT2123

[SwimZONE]

It looks like it could use a tad bit less banking, that's all that's really wrong with it.

[Rollerboaster]

If you want to have a turning pullout take off the predrop I don't think a first gen drop really flows well with the turning pullout...

[mynci321]

I've redone the turn, and I think it looks a lot better than before. I want to keep the turning pullout because I have a layout all planned out and I even finished it in nL. Pics later today.