29 replies to this topic

[The Stig]

Two new track spines for you to try!

Stig's B&M Track Spine
For B&M Inverted spine, look at pictures upside-down.




The connectors must be on this side of the track. This is important!





Add supports.



Warning! If you put all 4 spacers in the same spot as shown above, then your track will sag as shown above. Please stagger your spacers.

Stig's Wooden Track Spine




The connectors must be on this side of the track. This is important!





Add supports.

[tornado96]

EPIC STIG!!!!

Although I highly doubt VV woodies are a good idea!
I like the B&M track spine but ity'll use a LOT of yellow connectors. I'll have to try them out sometime!

[Micronex]

I've built a Jesper launch, changed around gears and chain, and for about 1000 pieces (and then about 400 chain) you've got a great launch with no motors.

I'll post some pics later.

[Kevkillerke]

^
I know someone who did that before, and I am making one too.

[Maxwell58]

^
I know someone who did that before, and I am making one too.

Would you be able to post a tutorial? Please?

[The Stig]

I've found a lube that works great on VV cars.
Hillman Powdered Graphite.
You can pick up a tube of the stuff for $3 at WalMart next to where they make keys.

Just be sure to lube your cars outside or over a sink or something because the graphite will go everywhere.

Enjoy your faster cars

[Dragon]

^
I know someone who did that before, and I am making one too.

Would you be able to post a tutorial? Please?

it was kyo in his coaster charge or something like this

[Bleach11]

Great tutorials! I'm working on a new micro steel type roller coaster so this will come in handy! Thank you!!!!!

[Fantastichumore]

Nice ideas! that makes microcoasters more interesting :]