#1
Posted 23 December 2012 - 10:38 AM
#2
Posted 23 December 2012 - 10:41 AM
The signature you have requested is not available at the moment. We apologize for the inconvenience.
#3
Posted 23 December 2012 - 10:55 AM
The tubes to the left was the supports of "The Edge" or the new tubes for this coaster
#4
Posted 23 December 2012 - 11:04 AM
I'm pretty sure they are from The Edge, because they are way to big for the cubeThe tubes to the left was the supports of "The Edge" or the new tubes for this coaster
Looks already cool Maarten! Can't wait for the next update
-Joost
#5
Posted 23 December 2012 - 11:15 AM
SSCoasters Moderator
Fear the Bankatana | The SSCoasters Forum Rules
Maverick|Tatsu|TTD|Fahrenheit|Skyrush|MF|Cheetah Hunt|Storm Runner|SheiKra|Montu
Coaster Count: 102
#6
Posted 23 December 2012 - 12:41 PM
#7
Posted 23 December 2012 - 02:22 PM
The Jungle Beast Luminous Infernal Hurricane Forbidden Mine Expedition Sleigh Ride Volcanic Doomfire Rorschach Terminator: Clash of the Machines Rock'n'Rolla
#8
Posted 23 December 2012 - 03:35 PM
Interesting location in respect to the base for the tower, it seems like it may hinder your layout possibilities. But if you have a layout in mind, then I won't complain.
I haven't even thought of that, but that's a good point. Do you already have a lay-out in mind Maarten? A spiral lift in the corner of the base would make you have more lay-out possibilities than in the centre. I like concept of this coaster a lot, since I haven't seen a spiral lift on SSC lately. (rode them enough though... )
#9
Posted 24 December 2012 - 05:52 AM
I'm assuming you're making a spiral lift because of the gear in the middle of the base. I'm very excited for this new coaster Maarten!
Yes, there will be a spiral lift .
Spiral lift in coming !
The tubes to the left was the supports of "The Edge" or the new tubes for this coaster
They were from The Edge.
I'm pretty sure they are from The Edge, because they are way to big for the cube
Looks already cool Maarten! Can't wait for the next update
-Joost
Thanks !
Very interesting building the spiral lift in the center of the plot. Should make for a very cool layout.
I hope the layout I have in mind, or at least the element I have in mind, will make up something cool!
i think the spiral lift will be the flush because its a toilet/wc coaster
Haha, not not really .
Interesting location in respect to the base for the tower, it seems like it may hinder your layout possibilities. But if you have a layout in mind, then I won't complain.
It does indeed hinder layout possibilities, but I have some nice things in mind .
I haven't even thought of that, but that's a good point. Do you already have a lay-out in mind Maarten? A spiral lift in the corner of the base would make you have more lay-out possibilities than in the centre. I like concept of this coaster a lot, since I haven't seen a spiral lift on SSC lately. (rode them enough though... )
Yes, I do have some layout and element ideas.
UPDATE!
I have got most of the spiral lift done, except for adding some flex rods and adding the motors at the bottom.
I chose to make that rod on the car symmetrical, I think it looks better than just sticking out on one of the sides.
#10
Posted 24 December 2012 - 06:05 AM
-=Tk=-
#11
Posted 24 December 2012 - 06:27 AM
Silverstar Nemesis Poseidon Air Saw The Swarm Nemesis Inferno Colossus ​RageThe Smiler Oblivion Shockwave GeForce Apocalypse Detonator Kumali Mumbo Jumbo Atlantica Supersplash Velocity Blue Fire Megacoaster Pepsi Max Big One Wodan
If only I had more space/pieces. Delete as appropriate
#12
Posted 24 December 2012 - 10:32 AM
Also, I hope the lift moves really smooth and isn't all jerky.
#13
Posted 24 December 2012 - 12:50 PM
#14
Posted 24 December 2012 - 02:33 PM
The signature you have requested is not available at the moment. We apologize for the inconvenience.
#15
Posted 24 December 2012 - 03:20 PM
MF | Toro | TTD | Maverick | Ka | Griffon | Nitro | Storm Runner | Skyrush | Phoenix
#16
Posted 25 December 2012 - 06:45 AM
Does the lift work smooth or not? I really hope so Looks great so far!
-=Tk=-
Yes, it works really smooth .
Looking really nice. Making it symmetrical would probably help the balance of the car as well. Interested to see where this goes.
Thanks!
I like how you made the rod symmetrical because you're right, it does look a lot better. I am just curious to see what kind of layout you do.
Also, I hope the lift moves really smooth and isn't all jerky.
It's always good to hear that you like it . And yes, the lift is really smooth.
Looks really neat. I hope it will work really smoothly.
Thanks!
Very nice track work!
Lol, thanks .
Very nice, it looks really clean. I also like that you have the trains entering and exiting the lift diagonally to the sides of the box. I'm interested to see what layout you have in store!
I will release the first part of what I had in mind right now.
UPDATE!
Just two pictures this time.
Side view.
#17
Posted 25 December 2012 - 06:49 AM
#18
Posted 25 December 2012 - 07:59 AM
Great job for the rest, I really like it!
-=Tk=-
#19
Posted 25 December 2012 - 08:43 AM
#20
Posted 25 December 2012 - 09:03 AM
The signature you have requested is not available at the moment. We apologize for the inconvenience.