Jump to content




Emperor Sea World Recreation

Started by Wyatt , Mar 05 2022 01:45 AM
sea world emperor dive machine

  • Please log in to reply
5 replies to this topic

#1 Wyatt

Wyatt

    Member

  • PipPip
  • 27 posts

Posted 05 March 2022 - 01:45 AM

Since the world is trembling right now I figured I would share my newest coaster with you guys and get our minds off the TV and the news.  I haven't build in a while so I may be a little rusty LOL, So far all we have is the lift hill. I'm really glad to see new builders building with the original large pieces again. Please keep in mind that I do not have enough blue cross ties to complete a whole circuit.

Attached Files


Edited by Wyatt, 05 March 2022 - 01:48 AM.


#2 BGTKing

BGTKing

    Administrator

  • 7516 posts

Posted 06 March 2022 - 09:36 AM

Looking good so far!



  • Wyatt likes this

#3 Wyatt

Wyatt

    Member

  • PipPip
  • 27 posts

Posted 06 March 2022 - 06:20 PM

Alright guys this should be an easy and quick layout We have the turn done and the drop.  The only thing we will need help and advice on is the

immelmann loop cause we know it's half a vertical loop but the exit has this weird turn at the top.

Attached Files

  • Attached File  5.jpg   121.29KB   0 downloads
  • Attached File  1.jpg   159.21KB   0 downloads
  • Attached File  2.jpg   117.72KB   0 downloads
  • Attached File  3.jpg   173.16KB   0 downloads
  • Attached File  4.jpg   171.26KB   0 downloads


#4 SCM

SCM

    Omnipotent Lucid Dreamer

  • 2039 posts

Posted 06 March 2022 - 10:18 PM

Having built two dive machine drops before, I can tell you that you should make the pullout bigger, if possible. The drop should really only be vertical at one point. As for the immelmann, the main thing you'll want to focus on is when to start unbanking. It'll be somewhere between where it goes vertical and before it goes upside-down. I highly recommend looking at reference photos. However many you can. 



I'm not done building yet. 

Glimpses

Speed Coaster Master

#5 Steelwheels33

Steelwheels33

    Construction Foreman

  • 112 posts

Posted 13 March 2022 - 09:55 PM

This looks amazing so far! Really smooth. Here is a reference for the Immellman. Kind of looks like the ride layout you have. It was a bit bigger than you will need most likely but you can see where my banking began... somewhere between the two arrows.

Attached Files



  • Wyatt likes this

#6 Steelwheels33

Steelwheels33

    Construction Foreman

  • 112 posts

Posted 13 March 2022 - 10:01 PM

Sorry, would have edited the post if I could have. But here is a better angle pic. This shows from the same angle as the pic you shared.

Attached Files



  • Wyatt likes this
Back to K'NEX Coaster Construction



Also tagged with one or more of these keywords: sea world, emperor, dive machine

  1. SSCoasters Community
  2. → K'NEX Discussion & Construction Area
  3. → K'NEX Coaster Construction
  4. Privacy Policy