34 replies to this topic

[~G3n3rOo2256~]

here is my new hyper called windstorm. This will NOT be in the winter contest. It is 4 feet 10 inches. This is not my final crest. tell me what you think!

[metallicais1337]

Well... not much to comment on, except for the crest, which, like you said, is nowhere near perfect.

[Jesperdude]

What is it with your supports?
If you change the purple/silver 3D connectors in the bottom of the diagonal lift supports to yellow connectors, you don't need all those useless lift supports that are on the ground.

[~G3n3rOo2256~]

what do you mean? can I have a pic?

[Jesperdude]

Here you can see what I'm talking about.
Do you already have a layout in mind?

[~G3n3rOo2256~]

drop,hill,hill,hammerhead, and thats it. Oh I get what your saying. Just put the 3ds from the bottum of my backbone to the half moons?

[SwimZONE]

Cristicism

1. the lift is sagging VERY BAD.
2. Your Supports are VERY BAD.
3. you should only need One MIDLIFT support tower.
4. the Lift ISN'T at a 45* angle.

Answers

1. Get the right supports, the number connections between the tower and the structure is very low. you need to have four to fix it.
2. this is because of the single connection from the lift to the towers
3. you have two, which is also a part of the problem for the sagging lift, I think
4. I don't know what it is about it, but I can tell it's not 45*

[knexems]

^Well dude, all of those critizing things you just said are all wrong.

1.The lift isn't sagging all that much, just barely.
2.His supports are fine, he just doesn't need the two support towers.
3.You don't need any for the height that he is working with.
4.Yes it is.

[~G3n3rOo2256~]

could I move on?

[christian]

You could, but you may'nt ;(.

Nah you can go (I guess).

-MIBB)

[G Force]

I thought CC10 said you couldnt use the name Windstorm?

You can move on if you fix the lift.

[~G3n3rOo2256~]

http://i249.photobuc...65/IMG_7411.jpg

so I just need to put half moons of the bottum of my backbone?

[Jesperdude]

so I just need to put half moons of the bottom of my backbone?

Yes.

[~G3n3rOo2256~]

ok thanks! will be fixed!

[Airdog]

The main lift support is 5 and 1/2 grays tall (I think). But your lift is ment for a 6 and 1/2 gray rod tower. That is what causing your lift not to be 45*.

You should also replace purple 3-D's with yellow or gray half moons. That causing less sagging in your lift. Fix these and you'll be good.

EDIT- All you guys beat me lol. I posted and was like they just said everything I did.

[~G3n3rOo2256~]

it shall be fixed.

[~G3n3rOo2256~]

I am half way done with my staton. It is pretty sick! I am making the doors open using a motor. it insnt that complicated just alot of work. it is proboly my best station yet. I will have pics of it later today.

[~G3n3rOo2256~]

Here is my station. I made 4 gates that move. It is petty sweet. this is my best station yet.

[CuteLittleBunny23]

Whats with giant gap in the roof? And are you gunna have enough pieces to finish?

[~G3n3rOo2256~]

yes I barly use the blue rods. and have about 100 of the half moons. and about 150 of the ladders. how do you like it?